03 SETUP
55
SETUP_
Setup menu 2 (Á )
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or
TV, etc.) to which the camera is connected. PAL mode can support only
BDGHI.
Connecting to an external monitor
When the camera is connected to an external
monitor, the image and menus on the LCD
monitor will be visible on the external monitor
and the LCD monitor of the camera.
Selecting Video out type
Yellow - Video
White - sound
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Ger-
many, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand,
Singapore, Spain, Sweden, Switzerland, Thailand, Norway.
-When using a TV as an external monitor, you will need to select the
external or AV channel of the TV.
-There will be a digital noise on the external monitor, but it is not a
malfunction.
-If the image is not in the centre of the screen, use the TV controls to
centre it.
-When the camera is connected to an external monitor, some parts of
the image may not be displayed.
-When the camera is connected to an external monitor, the menu will be
visible on the external monitor and the menu functions are the same as
those indicated on the LCD monitor.
SETUP 2
LCD Save
Quick View
Power Off
PAL
NTSC
Back Set
OK
Reset
Format
Video Out