54 _SETUP
If you set the [LCD save] to On and the camera isn't operated during the
specifi ed time, the LCD monitor will be turned off automatically.
- Sub menus
[Off] : The LCD monitor will not be
turned off.
[On] : If the camera isn't operated dur-
ing the specifi ed time (about 30
SEC.), the camera power will be
idle (Camera status lamp:Blinking)
automatically.
LCD save
This function switches the camera off after a set amount of time in order
to prevent unnecessary battery drainage.
- Sub menus
[Off] : The power off function will
not operate.
[1, 3, 5, 10 min] : The power will turn off
automatically if not used
for the period of time
specifi ed.
- After replacing the battery, the power off setting will be preserved.
- Note that the automatic power off function will not operate if the
camera is in the PC / Printer mode, slide show, playing back a voice
recording and playing back a movie clip.
Auto power off
Setup menu 2 (Á )
If you enable Quick View before capturing an image, you can view the
image you just captured on the LCD monitor for the duration set in the
[Quick View] setup. Quick view is possible only
with still images.
- Sub menus
[Off] : The quick view function
can’t be activated.
[0.5, 1, 3 sec] : The captured image is
briefl y displayed during
the selected time.
Quick view
SETUP 2
Video Out
Power Off
LCD Save 1 sec
Off
Back Set
OK
Reset
Format
0.5 sec
Quick View
3 sec
SETUP 2
Video Out
Quick View
LCD Save
5 min
3 min
Back Set
OK
Reset
Format
Off
Power Off
1 min
10 min
SETUP 2
Video Out
Quick View
Power Off
On
Off
Back Set
OK
Reset
Format
LCD Save