User Guide

The following describes how to adjust the Back

Focus when using a Zoom lens.

Lightly loosen the screw fixing the Back Focus Adjustment Ring using a screwdriver.

Image a vivid subject (with check patterns) at a distance of 3~5m away and adjust the zoom of the lens to TELE as far as it goes. Then adjust the Focus Ring of the lens to obtain the clearest image of the subject.

Adjust the zoom of the lens to WIDE as far as it goes. Then turn the Back Focus Ring of the camera to obtain the clearest image of the subject.

Repeat no. & 2~3 times to exactly coincide the zoom focus from TELE and with that from WIDE.

Fasten the screw fixing the Back Focus Adjustment Ring.

VIDEO

LENS

DC

Note:

Turning the Back Focus Adjustment Ring to the "C" direction beyond the adjustable range makes a sound at the limit.

User Guide

Connecting Cable

After mounting the lens and setting the Lens Selection Switch, connect the prepared cable to each terminal of the camera.

E

First, connect one end of the BNC cable to the Video Output Terminal (VIDEO OUT) of the camera.

Then connect the other end of the BNC cable to the Video Input Terminal of the monitor.

 

VIDEO LINE

AUDIO LINE

 

Video A

Video B

Video C

C

 

 

A B

IN OUT

IN OUT

IN OUT

IN

 

 

 

OUT

Video In Terminal on the rear of the monitor

VIDEO

LENS

DC

BNC Cable

Video Out Terminal

(VIDEO OUT)

9

10