Samsung SC-D371, SC-D975, SC-D375(H), SC-D372 manual Viewing the Demonstration

ENGLISH

Initial Setting : System Menu Setting

Viewing the Demonstration

✤ Demonstration automatically shows you the major functions that are included with your	1
Camcorder so that you may use them more easily.

✤The Demonstration function may only be used in the <Camera> mode without a tape inserted in the Camcorder. ➥page 19

✤Before you begin: Make sure that there is no tape inserted in the Camcorder. ➥page 32

✤The Demonstration operates repeatedly until the Demonstration mode is switched Off.

1. Set the [Power] switch to [CAMERA].

2.Set the [Mode] switch to [TAPE]. (SC-D375(H)/D975 only)

3.Press the [MENU] button.

■The menu list will appear.

4.Press the [▲ / ▼] button to select <System>, then press the [OK] button.

5.Press the [▲ / ▼] button to select <Demonstration>, then press the [OK] button.

6.Press the [▲ / ▼] button to select <On>, then press the [OK] button.

7.Press the [MENU] button.

■The Demonstration will begin.

8.To quit the Demonstration, press the [MENU] button.

[ Notes ]

■The Demonstration function is automatically activated when the Camcorder is left idle for more than 10 minutes after switching to the <Camera> mode (if no tape is inserted in the Camcorder).

■If you press other buttons (FADE, C.NITE, EASY.Q) during the Demonstration mode, the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.

4	Camera Mode
	√System
	Clock Set
	Remote	√On
	Beep Sound	√On
	Shutter Sound	√On
	Language	√English
	Demonstration	√On

Move OK Select MENU Exit

6	Camera Mode
	Back
	Clock Set
	Remote
	Beep Sound
	Shutter Sound
	Language	Off
	Demonstration	On

Move OK Select MENU Exit

7SAMSUNG Camcorder is...

34x Optical Zoom

28

Demonstration