ENGLISH

Basic Recording

Self Record using the Remote Control (Setting the Self Timer) (SC-D375(H)/D975 only)

The SELF TIMER function works only in <Camera> mode. page 19

When you use the SELF TIMER function on the remote control, the recording begins automatically in 10 seconds.

1.Set the [Power] switch to [CAMERA].

2.Set the [Mode] switch to [TAPE].

3.Press the [SELF TIMER] button until the appropriate indicator is displayed.

4.Press the [Record Start/Stop] button to start the timer.

SELF TIMER starts counting down from 10 with a beep sound.

If you want to cancel the SELF TIMER function before recording, press the [SELF TIMER] button.

5.Press the [Record Start/Stop] button again when you wish to stop recording.

[ Notes ]

Do not obstruct the remote control sensor by putting obstacles between the remote control and Camcorder.

The remote control maximum range is 4 ~5m (13 ~17 ft).

The effective remote control angle is up to 30 degrees left /right from the center line.

Using a tripod (not supplied) is recommended for delayed recording.

1

3

œ

45

38

Page 42
Image 42
Samsung SC-D375(H), SC-D371, SC-D975, SC-D372 manual Basic Recording