ENGLISH
Playback
Connecting to a TV that has no Audio/Video Input Jacks
✤You can connect your Camcorder to a TV through a VCR.
1.Connect the Camcorder to your VCR with the Audio/Video Cable.
■The yellow jack: Video
■The white jack: Audio(L) - Mono
■The red jack: Audio(R)
2.Connect a TV to the VCR.
3.Set the [Power] switch to [PLAYER].
VCR
TV
Antenna
Camcorder
Audio/Video
Cable
Signal flow
Audio/Video
Cable
4. Set the [Mode] switch to [TAPE]. | ||
|
5.Turn on both the TV and VCR.
■Set the input selector on the VCR to Line.
■Select the channel reserved for your VCR on the TV set.
6.Play the tape.
Playback
œ | œ |
1. Connect a power source and set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Insert the tape you wish to play back.
4. Using the [œœ (REW)]/[√√(FF)] buttons, find the first position you wish to play back.
5. Press the [√❙❙ (PLAY/STILL)] button.
■ The images you recorded will appear on the TV after a few seconds.
■If a tape reaches its end while being played back, the tape will rewind automatically.
[ Notes ]
■The playback mode (SP/LP) is selected automatically.
■If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
66
