How to use OSD Menu
How to use OSD Menu
| ELC |
LEVEL | |
BACKLIGHT | BLC |
AREA | USER |
<SIZE> |
|
<LOCATION> | |
Note : |
– If you use the VPS (Virtual Progressive Scan) function, the CCD |
reads differently so you can not use WDR simultaneously. |
If you set VPS to ON, WDR will be automatically set to OFF. |
– For |
AGC FIX
LEVEL[01]
Note :
–If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the MOTION menu will be deactivated.
❖ DNR | [OFF,LOW,MID,HIGH, USER(1~16)] |
③If you set the BACKLIGHT option to WDR, you will see a menu where you can set the WDR options. Specify the composition level in the WEIGHT menu. You can also select any of OUTDOOR, and INDOOR in WHITE BAL.
For ANTI ROLLING, select an option to reduce the COLOR ROLLING effect.
|
| ELC |
|
LEVEL | [ | ||
| BACKLIGHT |
| WDR |
| WEIGHT |
| MID |
| WDR LEVEL | [ | |
| WHITE BAL |
| INDOOR |
| ANTI ROLLING | MID | |
| |||
❖ AGC |
[OFF, VERY LOW, LOW, MID, HIGH, VERY |
HIGH, USER, FIX] |
The AGC (Auto Gain Control) menu is used to |
set the AGC level of the camera. When the AGC |
is active, the camera automatically increases the |
sensitivity by amplifying the Video signal when the |
strength of the signal falls below the normal value. |
If OFF or FIX mode is selected in the |
menu, you can specify the AGC level. |
If you press the SETUP switch with a USER sub |
menu selected, you will see the appropriate screen. |
AGC USER
LEVEL[16]
If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen.
As a fixed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fixing it.
Note :
–If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the AGC menu will be deactivated.
–If FLICKERLESS is set to ON, the AGC FIX mode will be disabled.
❖ MOTION [S.SLOW, SLOW, NORM, FAST, F.FAST]
The MOTION menu is used to adjust the strength of the AGC level for a control of the camera motion. This is available only if the
You can configure the DNR (Digital Noise Reduction) related settings.
Reduces the noise on the screen.
This is especially useful for a severely distorted screen.
You can set the level if you set DNR to USER.
❖
[OFF, AUTO X2, AUTO X4, AUTO X6, AUTO X8, AUTO X12, AUTO X16, AUTO X24, AUTO X32, AUTO X48, AUTO X64, AUTO X96, AUTO X128, AUTO X256, AUTO X512]
For brighter and clear video output, it automatically extends capturing exposure under low illumination circumstances such as night or insufficient lighting.
❖ XDR (eXtended Dynamic Range) |
[OFF, LOW, MID, HIGH] |
Actively controls the gamma compensation in the |
way it operates the ambient luminance contrast in a |
certain pixel unit to determine the optimal visibility. |
WDR(Wide Dynamic Range) extends the gain range of the screen that is mostly useful if you take a simultaneous picture of both indoor and outside of the window.
Namely, it improves the sharpness of the picture in outdoor scenery as well as indoor.
24 – High Resolution Compact ATM Camera
In USER mode, you can break down the level in 16 steps from VERY LOW to VERY HIGH to your preference.
You can select one from S.SLOW, SLOW, NORM, FAST and F.FAST for the AGC level.
If you monitor a fast moving object in a low contrast scene, select F.FAST while select S.SLOW for a hardly moving object in the same lighting condition.
Select one from OFF, LOW, MID and HIGH. |
Closing to HIGH will increase the compensation |
level. |
25
