Samsung SCB-2020, SCB-3020 user manual Other SET, External TRG, Factory Defaults, OSD Color

How to use OSD Menu

How to use OSD Menu

Use the cdef switch to select one from PRIVACY 1 through 12.

Select one from PRIVACY 1~12 and press the SETUP switch to confirm your setting. You can specify a pixel that moves as you change the PIXEL LEVEL to set the position.

PRIVACY ZONE SET1

PIXEL LEVEL [4]

- How to set the position

You can move the position of the overall area.

1By pressing the SETUP switch in <POSITION>, you can move the overall position of the privacy zone.

2 Use the cdef switch to move the position

and press the SETUP switch to confirm it.

 Note :

OTHER SET			EXTERNAL TRG
<SCB-3020>			STILL TIME	OFF
			DELAY TIME	FIX
	eOTHER SETf
	EXTERNAL TRG	OFF
FACTORY DEFAULTS		￿
OSD COLOR		BW
			￿	￿

<POINT>￿ <POSITION>￿

￿ ￿ ￿ ￿

- How to set the point

You can set each position of the 4 points.

1If you press the SETUP switch in <POINT>, you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move.

2Use the cdef switch to set the position of each point. Set each position of the four points and press the SETUP switch to complete the positioning.

– If more than one PRIVACY ZONE is specified and the PRIVACY

SET is set to ON, the PIP function will be deactivated.

– If the 12th PRIVACY ZONE is specified, the LINE function of

FENCE will be deactivated.

￿￿

<SCB-2020>

	eOTHER SETf
	FACTORY DEFAULTS	￿
OSD COLOR		BW
￿		￿

❖EXTERNAL TRG

Set the EXTERNAL TRG menu to ON and press the SETUP switch to display the appropriate screen.

You can set the STILL TIME to 1~4 seconds.

If DELAY TIME is set to FIX, the DELAY TIME will be set in sync with the STILL TIME if set to USER, the DELAY TIME will be set to your setting.

Note :

–If VPS is set to OFF, the EXTERNAL TRG menu will be deactivated.

–If the external signal is received when the lighting control is not stable, this may cause an error.

–SCB-2020, the VPS and WDR mode are not available.

❖FACTORY DEFAULTS

All the settings will be restored to the factory default.

❖ OSD COLOR [BW, R/G/B]

You can set the OSD(On-screen Display) color to COLOR or B/W.

34 – High Resolution Compact ATM Camera 35