How to use OSD Menu
How to use OSD Menu
INTELLIGENCE
eINTELLIGENCEf
MOTION |
| OFF | |
ADVANCED |
| OFF | |
MASK AREA | 1 2 3 4 | ||
DISPLAY |
|
| ON |
SENSITIVITY | [3] |
|
|
RESOLUTION | [3] |
|
|
ALARM OUT |
|
| |
❖ ADVANCED [OFF, FIXED/MOVED, FENCE]
Detects a motion of an object and displays an image of any moving object before tracking the moving route.
•FENCE
This is to detect if a moving object passes through the specified LINE or AREA.
- How to set the line |
|
|
|
| - How to set the area |
|
|
|
| |||||
| LINE |
|
|
|
|
|
| AREA |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| [4] |
|
| ||
| PIXEL LEVEL |
| [4] |
|
|
|
| PIXEL LEVEL |
|
|
| |||
| <POINT> |
|
|
|
|
|
| <SIZE> |
|
|
|
|
|
|
| DIRECTION | §¨ |
| <LOCATION> |
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
In a condition where a moving object is detected in an analysis of the previous and current frames whose movement overlaps a certain area, the
|
|
You can set the motion detection and tracking in the INTELLIGENCE menu.
❖ MOTION | [OFF,TRACKING,DETECTION] |
•TRACKING
Detects and tracks a moving object.
•DETECTION
Detects a moving object.
Note :
system displays “PASS” if the object’s center line passes through the line while it displays “ENTER” or “EXIT” if the center point passes through the area.
| FENCE |
|
|
LINE | OFF |
AREA | OFF |
1If you press the SETUP switch with the LINE option set to ON, you can specify the position and detection direction of the line.
2If you change the PIXEL LEVEL for setting the
position, specify the pixel that moves by a single pressure of the cdef switch.
3In <POINT>, you can specify the first position of the line by pressing the SETUP switch once, and
the second position by pressing the switch again. Use the cdef switch to specify the position. Set each position of the two points and press the SETUP switch to complete the positioning.
1If you press the SETUP switch with the AREA option set to ON, you can specify the position and size of the area.
2If you change the PIXEL LEVEL for setting the
position, specify the pixel that moves by a single pressure of the cdef switch.
3In <SIZE>, press the SETUP switch and use the cdef switch to adjust the size.
Press the SETUP switch again to complete the sizing.
4 In <LOCATION>, press the SETUP switch |
–If it is set to DETECTION, you can not set such functions as FIXED/MOVED and FENCE in the ADVANCED menu.
You can set the position and detection direction of the
LINE, and the size and position of the AREA.
4 If you change the DIRECTION, you can specify the detection direction. The detection direction based on the defined two points will be displayed on the screen.
and use the cdef switch to specify the |
position. |
Press the SETUP switch again to complete the |
positioning. |
30 – High Resolution Compact ATM Camera | 31 |
