Disassembling/assembling the Main body from the Case
The holes that are not used should be tightly sealed up using the screws provided for waterproofing. To detach the Main body from the Case, follow the instructions below:
1.1. Remove the Dome cover first.
2.Detach the Main body of the camera from the Case.
1)Make loose two screws by rotating counterclockwise.
2)Detach the Main body of the camera after unlocking by pulling the left and right levers in the arrow direction.
1)
2)
3.Assemble the Main body of the camera with the Case. (Align three alignment grooves of the Main body with the bumps of the Case and assemble them.)
4.Attach the Dome cover using the
16
