Part Names and Functions
❶ Camera Operation Switches (Setup Switches)
The functions of the camera operation switches change depending on whether the Camera is currently in the usual operation mode (i.e., the setup menu is not showing on the screen) or the setup menu mode.
E
➻ In the usual operation mode
- [UP/DOWN] Directional keys: The [UP] key is used as the ZOOM TELE switch, and the [DOWN] key is used as the ZOOM WIDE switch.
- [LEFT/RIGHT] Directional keys: The [LEFT] key is used as the FOCUS NEAR switch, and the [RIGHT] key used as the FOCUS FAR switch.
- [ENTER] key: This key is used to go into the setup menu. ➻ In the setup menu mode
- [UP/DOWN] Directional keys: These keys are used to move the cursor up and down.
- [LEFT/RIGHT] Directional keys: These keys are used to move the cursor left and right, or to sequentially view the values that can be assigned in each setup menu.
- [ENTER] key: This key is used to select a setup menu with a submenu in order to open the submenu, and to accept the current value.
❷ Power Input Connector and Video Output Connector (4-Pin)
These connectors are used to connect the power adapter cable and video input cable.
❸ RS485 Connector and Alarm Output Connector (4-Pin)
These connectors are used to connect an RS485 remote control cable and a cable used for transmitting the ALARM signal at the time of the MOTION DET mode.
8
Chapter 2
Installing the Camera
E
This chapter explains what to check before installing the Camera, how to choose an installation site, and what precautions should be taken during installation.
Now, let’s install the Camera and connect cables.
9
