Samsung SCC-A2033P, SCC-A2333P How to use OSD Menu, RED Adjusts the strength of the red color

How to use OSD Menu

• NIGHT

Use the NIGHT mode if you want to set the white balance differently according to the ambient luminance.

If the NIGHT mode is set to OFF, the white balance will always operate as set in DAY mode; if not to OFF, the camera will switch to as set in DAY/NIGHT mode according to the brightness.

In NIGHT mode, you can set the values of RED, BLUE and BRIGHTNESS. The screen will be displayed in colors according to your settings.

	‹WHITE BAL‹
DAY/NIGHT			NIGHT
BRIGHTNESS				MID
MODE			AWC￿
RED		[00]----I----
BLUE		[00]----I----
R-GAIN		[0248]
B-GAIN		[0247]
￿		￿		￿

–RED : Adjusts the strength of the red color.

–BLUE : Adjusts the strength of the blue color.

–R-GAIN/B-GAIN : Enables you to set the current color temperature manually.

–BRIGHTNESS : Select a brightness level in switching from setting in DAY mode to setting in NIGHT mode.

❖ DIGITAL ZOOM [ON/OFF]

You can set the digital zoom factor and position. If you press the SETUP switch with the DIGITAL ZOOM function set to ON, you will see the appropriate screen.

When the zoom factor and position are defined, the digital zoom function will operate.

‹DIGITAL ZOOM‹

RATIO	[X1.0]
< LOCATION > ￿

ENG

Note :

–You can set the values of R-GAIN and B-GAIN only in AWC mode.

–If AGC is set to OFF or FIX, you can not access the NIGHT menu.

–For adjusting the white balance, the following

5 modes are provided:

•ATW1(Auto Tracing White Balance mode 1): The camera can automatically adjust the color temperature in real time, according to the ambient conditions. The color temperature ranges from approx. 2500K to 9300K.

•ATW2: The color temperature ranges from approx. 2,000K to 10,000K.

•AWC ( Auto White Balance Control): If you press the SETUP switch in the appropriate item position, Auto White Balance will perform once.

•3200K : Set color temperature to 3200K

•5600K : Set color temperature to 5600K

￿ ￿ ￿

-LOCATION : If you press the SETUP switch in the condition where the image is enlarged as much as the ratio setting, you can watch an invisible area of the effective screen as well using the cdefswitch.

Note :

–If the digital zoom factor is set to larger than 1x, the FENCE function will be deactivated.

The DIGITAL ZOOM function enlarges the pixel itself, which can cause deterioration of the quality.

❖DETAIL [0~3]

Controls the horizontal or vertical distinction.

English – 21