Samsung SCC-B2337P, SCC-B2037P manual How to use OSD Menu

How to use OSD Menu

•AUTO

The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition.

If you press the SETUP switch with an AUTO- based sub menu selected, you will see the appropriate screen.

	‹AUTO‹
BURST			OFF
DAYÆNIGHT
BRIGHTNESS			MID
DWELL TIME			2S
NIGHTÆDAY
BRIGHTNESS			MID
DWELL TIME			5S
MASK AREA			1 2
￿		￿	￿

You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.

You can select from LOW, MID and HIGH for the brightness of DAYÆNIGHT, which is a brightness level in switching from the color filter to Black-and-White. Closing to LOW from HIGH will switch the filter in a low contrast scene.

The DWELL TIME of DAYÆNIGHT is a time required to determine the need for switching the filter.

You can select from LOW, MID and HIGH for the brightness of NIGHTÆDAY, which is a brightness level in switching from the Black-and- White filter to color. Closing to LOW from HIGH will switch the filter in a low contrast scene.

The DWELL TIME of NIGHTÆDAY is a time required to determine the need for switching the filter.

The MASK menu is used to prevent a filter switch error or inability of determining the switch in existence of a high spot light source at night. If you press the SETUP switch in item 1 or 2 of the MASK menu, you will see a menu where you can specify an area to mask.

‹MASK AREA‹

<SIZE> ￿ <LOCATION>￿

￿ ￿ ￿ ￿ ￿

You can specify Mask 1 and 2 simultaneously. The mask is used only for determining the filter switch and any excessive bright area at night will be masked.

Note :

–If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated.

•EXT

This enables an auto switch between DAY and NIGHT mode using the interface with the external sensor.

❖ WHITE BAL [DAY/NIGHT]

If you want to adjust the color scheme, use the WHITE BALANCE function.

• DAY

In DAY mode, you can set the color values of RED and BLUE. The screen will be displayed in colors according to your settings.

	‹WHITE BAL‹
DAY/NIGHT				DAY
MODE			AWC￿
RED		[00]----I----
BLUE		[00]----I----
R-GAIN		[0248]
B-GAIN		[0247]
￿		￿		￿

Note :

–You can set the values of R-GAIN and B-GAIN only in AWC mode.

20 – DIGITAL COLOR CAMERA