❚Connecting cables and changing the settings
Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.
Monitor
BNC Cable
To connect cables
1.Connect the BNC cable to the Video connector attached on your camera.
2.Connect the BNC cable to the Video Input on a monitor.
3.Connect the power adapter to the Power connector attached on your camera. When the monitor is turned on, the camera image appears.
To adjust the lens focus, zoom, and function settings
1.Remove the Cover dome and Inner cover. For more details about the removing procedures, see “Installation procedure,” in the Installing camera section on the next page.
2.Adjust the focus, zoom, and function settings of your camera using the Focus lever, Zoom lever, and Switch board while you are viewing the image on the screen.
3.If you want to fix the adjusted focus and zoom, screw up the levers.
10
