Samsung C4303(P), SCC-C4201(P), C4301(P), C4203(P) manual Iris, Alc, Manu

IRIS

The level of video output to the monitor can be controlled by the iris lens according to the intensity of the incoming light. This product is equipped with an iris lens. In the ALC (Auto Light Compensation) menu, you can set the video output level. In the MANU menu, you can manually set the opening and closing of the iris.

BLC (Option in the ALC Menu)

If you use an ordinary camera when a strong light source, such as a spot light, is shining from behind the subject, the subject will appear dark on the monitor because of the back

If you set the AREA option to USER and press the ENTER button, you can customize the area to which the BLC function will be applied. You can specify the size of the area by using the UP, DOWN, LEFT, and RIGHT buttons. After setting the size of the area, press the ENTER button. The specified area will start flashing. Then, you can use the UP, DOWN, LEFT and RIGHT buttons to specify the location of the area.

Use the ENTER button and the UP, DOWN, LEFT and RIGHT buttons to specify the size of the area and to position the area. Press the ENTER button again to exit the AREA E setting menu.

light. For the SCC-C4201(P), C4203(P), C4301(P), and C4303(P), appropriately set the BLC in the ALC menu to solve the back -light problem and have a clear picture even under a spotlight or a very bright incident light.

ALC

SIZE

➞	➞
	➞
	➞

POSITION

Use the UP,

DOWN,

LEFT, and

RIGHT

buttons.

SIZE

POSITION

If you select ALC for IRIS and press the ENTER button, a screen from which you can set the video output level and BLC will appear. In the LEVEL option, you can use the LEFT/ RIGHT buttons to set the video output level. If you set the BLC to ON, the BLC function will be applied to the screen area specified in the AREA option. The AREA option can be set to either PRESET or USER to specify the screen area to which the BLC function will be applied. If you set the AREA option to PRESET, the BLC function will be applied to the area specified at the time of factory shipment.

MANU

If you select MANU for IRIS and press the ENTER button, a screen from which you can manually adjust the iris to a desired level will appear. In the LEVEL option, you can use the LEFT/ RIGHT buttons to set the manual opening and closing of the iris.

(SET UP)

CAMERA ID OFF

(MANUAL)

(SET UP)

CAMERA ID	OFF
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	ATW
SPECIAL	...
AUTO FOCUS	ONEAF
MOTION DET	OFF
PRESET	...
COLOR/BW	COLOR
EXIT	QUIT

Press the

ENTER button.

(ALC)
	PRESET...
AREA
BLC	OFF
LEVEL	( 0) ----I----
RET

IRIS	MANU...
SHUTTER	OFF
AGC	LOW
WHITE BAL	ATW
SPECIAL	...
AUTO FOCUS	ONEAF
MOTION DET	OFF
PRESET	...
COLOR/BW	COLOR
EXIT	QUIT

Press the

ENTER button.

LEVEL ( 00) ----I----

RET

17 18