Samsung C4203(P), SCC-C4201(P), C4301(P), C4303(P) manual Shutter, AGC Motion

SHUTTER

In the SHUTTER option, you can specify the speeds of the high-speed electronic shutter, auto low-speed shutter, and fix low-speed shutter. The high - speed electronic shutter supports 7 shutter speeds from 1/100 seconds to 1/10K seconds, and the auto low-speed shutter and fix low-speed shutter support 12 shutter speeds from 2x to 128x respectively. The low-speed shutter allows you to set the shutter speed to a slow setting to obtain a clearer video when shooting in dark lighting conditions. Select an auto low -speed shutter in order to have the camera detect the amount of light and automatically set the shutter speed to a slow setting according to the degree of darkness. Select an item that starts with "FIX" to specify the shutter speed yourself. The numbers that immediately follow the "AUTO" and "FIX" indicate the number of accumulated fields.

The higher the field number, the slower the shutter speed. Accordingly, a still picture will be sharper. In the case of video, an image captured of an object will be blurry.

(SET UP)

CAMERA ID	OFF
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	ATW
SPECIAL	...
AUTO FOCUS	ONEAF
MOTION DET	OFF
PRESET	...
COLOR/BW	COLOR
EXIT	QUIT

SHUTTER

➞ OFF ➞ 1/100(1/120) ➞ 1/250 ➞ 1/500 ➞ 1/1000 ➞ 1/2000 ➞ 1/4000 ➞ 1/10K ➞ OFF ➞ AUTOX2 ➞ AUTOX4 ➞ AUTOX6 ➞ AUTOX8 ➞ AUTOX12 ➞ AUTOX16 ➞ AUTOX24 ➞ AUTOX32

➞AUTOX48 ➞ AUTOX64 ➞ AUTOX96 ➞ AUTOX128 ➞ OFF

➞FIXX2 ➞ FIXX4 ➞ FIXX6 ➞ FIXX8 ➞ FIXX12 ➞ FIXX16 ➞

FIXX24 ➞ FIXX32 ➞ FIXX48 ➞ FIXX64 ➞ FIXX96 ➞ FIXX128

19

AGC (MOTION)

In the AGC (Automatic Gain Control) option, you can specify whether to automatically control the GAIN when the obtained video is below a certain level of brightness because it was recorded under insufficient lighting. To automatically control the GAIN, set the AGC option to LOW or HIGH. Otherwise, set it to OFF. If the you set the AGC option to LOW, the maximum GAIN of the AGC will be set to low, and if set to HIGH, the maximum GAIN will be set to high.

If the SHUTTER option is set to an auto low-speed, the AGC option will change to the MOTION option. In the MOTION option, use the LEFT and RIGHT buttons to select from S.S, E SLOW, NORMAL, FAST, and F.F.

(SET UP)

CAMERA ID	OFF
IRIS	ALC...
SHUTTER	AUTOX4
MOTION	NORMAL
WHITE BAL	ATW
SPECIAL	...
AUTO FOCUS	ONEAF
MOTION DET	OFF
PRESET	...
COLOR/BW	COLOR
EXIT	QUIT

☞S.S : Select to maximally enhance the resolution of a still image by increasing the lowest value of AGC GAIN and the scale of low speed shutter to their maximum.

(This is used mainly to monitor almost still objects in dark places.)

☞SLOW : Select to enhance the resolution of a still image as much as possible by increasing a low value of AGC GAIN and the scale of low speed shutter. (This is used mainly to monitor objects that make a small movement in dark places.)

☞NORMAL : Select to display the normal picture with a medium value of AGC GAIN and the scale of normal speed shutter. (This is used mainly to monitor moving objects in dark places.)

☞FAST : Select to focus on the moving objects by decreasing a high value of AGC GAIN and the scale of normal speed shutter. (This is used mainly to monitor objects showing active movements in dark places.)

☞F.F : Select to focus on the moving objects by decreasing the highest value of AGC GAIN and the scale of low speed shutter to their minimum. (This is used mainly to monitor fast moving objects in dark places.)

20