Auto Focus, Motion DET | Samsung SCC-C4301P, SCC-C4201P specs

☞CTRL TYPE : You can select the A, B, C, or D mode depending on the input of the wired remote control terminal. (See page 7.)

☞RS-485 :It sets up ADDRESS, PROTOCOL, and BAUD RATE of RS-485 communication.

(BAUD RATE: 2400bps, 4800bps, 9600bps, 19200bps, 38400bps)

Caution : A communication error may occur if you connect more than one camera set with an identical address.

AUTO FOCUS

In the AUTO FOCUS option, you can specify the Focus method to AF, MF, or ONEAF.

☞AF : Focuses automatically by continuously monitoring the screen in AUTO FOCUS mode. It does not process the FOCUS button input because it focuses automatically during ZOOM.

☞PIP : This is the Picture in Picture feature. It will show a screen reduced by 1/16 of the main screen only when operating the Digital Zoom. If you set the PIP option to ON and press the ENTER button, you can use the UP, DOWN, LEFT, and RIGHT buttons to set the PIP position.

*The PIP feature does not work in a low speed shutter mode. The MIRROR feature does not work on the PIP window.

☞MF : You can manually adjust the focus.

☞ONEAF : Focuses about 5 seconds only when ZOOM is moved Wide to Tele. It is same as MF mode while in STOP mode, and same as AF mode after ZOOM Tele.

(SET UP)
(SET UP)		E
CAMERA ID	OFF	E
IRIS	ALC...
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	ATW
SPECIAL	...
AUTO FOCUS	AF
MOTION DET	OFF
PRESET	...
COLOR/BW	COLOR
EXIT	QUIT

	(SPECIAL)
	(SPECIAL)
	EANGUAGE		ENGLISH
	V-SYNC		LINE...
	CTRL TYPE		A
	RS-485		...
	PIP		ON
	MIRROR		OFF
	D-ZOOM		OFF
	POSI/NEGA		+
	ZOOM SPEED		3
	DETAIL		(0) ----I--
	RET

Press the

ENTER button.

PIP

MOTION DET

In the MOTION DET option, you can set the Motion Detection function, motion detection sensitivity, and the motion detection area. If you set the Motion Detection function, you can detect an intruder's movement and check it through the monitor and the ALARM OUT terminal.

☞ MIRROR : Horizontally flips the video output signal.

☞ D-ZOOM :Sets the magnification of the Digital Zoom.

The magnification level can be set to up to 10x.

☞ POSI/ NEGA : Outputs the video output signal normally or

If you set ALARM which is located under COLOR/BW AUTO menu to ON while MOTION DET remains ON, the ALARM output port can not send any motion.

inversely.

☞ ZOOM SPEED : In the ZOOM SPEED option, use the

LEFT and RIGHT buttons to set the speed as follows:

1 : Takes about 17 seconds from 1 x to 22 x magnification (slowest speed).

2 : Takes about 10 seconds from 1 x to 22 x magnification (slow speed).

3 : Takes about 6 seconds from 1 x to 22 x magnification (fast speed).

4 : Takes about 3 seconds from 1 x to 22 x magnification (fastest speed).

☞ DETAIL: Adjusts the sharpness.

(SET UP)
(SET UP)
CAMERA ID	OFF
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	ATW
SPECIAL	...	Press the
AUTO FOCUS	ONEAF	Press the
AUTO FOCUS	ONEAF	ENTER
MOTION DET	ON...	ENTER
PRESET	...		button.
COLOR/BW	COLOR		button.
COLOR/BW	COLOR
EXIT	QUIT

(MOTION DET)

AREA PRESET...

SENSITIVITY MEDIUM RET

SCC-C4201P, SCC-C4301P specifications

Samsung has long been recognized as a leader in innovation within the electronics industry, and its SADT-101WM and SCC-C4201P models showcase this dedication to excellence in the realm of security technology. These two products are designed to enhance surveillance capabilities, ensuring safety and peace of mind for both residential and commercial applications.

The Samsung SADT-101WM is a high-performance IP dome camera that excels in delivering superior image quality. It features a 1.3 Megapixel resolution, which provides clear and detailed images suitable for various monitoring needs. One of its standout features is the advanced Wide Dynamic Range (WDR) technology; it enables the camera to capture high-quality images in challenging lighting conditions, whether in bright daylight or low-light environments. Additionally, the camera is equipped with a 2.8mm fixed lens, offering a wide viewing angle that makes it versatile for different installation scenarios.

In terms of build, the SADT-101WM is weather-resistant, boasting an IP66 rating, which ensures reliable performance in outdoor settings. Its robust design means it can withstand rain, dust, and other environmental factors, making it highly durable for long-term use. Moreover, the camera supports Power over Ethernet (PoE) technology, simplifying installation by allowing both power and data to be transmitted through a single cable.

On the other hand, the Samsung SCC-C4201P is an advanced CCTV camera tailored for a variety of surveillance applications. It features a 1/3" CCD image sensor that delivers vibrant colors and sharp images. The SCC-C4201P supports 550 TV lines of resolution, making it ideal for areas where detailed visuals are essential, such as retail spaces, parking lots, or critical infrastructure sites.

A major highlight of this model is its Automatic Gain Control (AGC) feature, which enhances image quality in low-light conditions. Additionally, it includes backlight compensation to ensure that subjects remain clearly visible even in scenarios with bright background lighting. The camera is also designed for both indoor and outdoor use, with weather-resistant capabilities.

Both models incorporate advanced motion detection technology, providing users with real-time alerts and improved security monitoring. With these features, Samsung continues to push the boundary of surveillance technology, ensuring that users have access to reliable, high-quality security solutions. Whether you are looking to bolster security at home or enhance operational safety in commercial environments, the SADT-101WM and SCC-C4201P are exemplary options that reflect Samsung's commitment to innovation in the security industry.

Samsung SCC-C4301P Auto Focus, Motion DET, Mirror Horizontally flips the video output signal

Models: SCC-C4201P SCC-C4301P