Samsung SCC-C4207P, SCC-C4307P manual Focus Mode, Motion DET

❙FOCUS MODE

The FOCUS MODE menu performs AF(Auto Focus), MF(Manual Focus), and ONEAF(One Auto Focus).

✔ AF : Focuses automatically by continuously monitoring the

screen in AUTO FOCUS mode. It does not process the

FOCUS button input because it focuses automatically

during ZOOM.

CAMERA ID	OFF
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	ATW1
FOCUS MODE	AF
MOTION DET	ON...
COLOR/BW	COLOR
PRIVACY	...
SPECIAL	...
PRESET	...
EXIT	QUIT

Press the

ENTER button.

(MOTION DET)

AREA PRESET...

SENSITIVITY L---I---H RET

✔ MF : You can manually adjust the focus.

✔ ONEAF : Focusing will take about 5 seconds in ONEAF

mode. When turned off, it is same to the MF

mode.

CAMERA ID	OFF
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	ATW1
FOCUS MODE	AF
MOTION DET	OFF
COLOR/BW	COLOR
PRIVACY	OFF
SPECIAL	...
PRESET	...
EXIT	QUIT

❙MOTION DET

If you select ON and press the ENTER button, the MOTION	E
DET screen will come up. You can set the AREA to which the
Motion Detection function will be applied to either PRESET or
USER. If you set the AREA option to PRESET, the Motion
Detection function will be applied to the areas preset as factory
defaults. If you set the AREA option to USER and press the
ENTER button, you can change the area size and position and
select the area where you want to apply the Motion Detection
function. You can specify the size of the area by using the UP,
DOWN, LEFT, and RIGHT buttons. If the area is not flashing,
press the ENTER button. When the area starts flashing, use the
UP, DOWN, LEFT and RIGHT buttons to specify the location of
the area. Use the ENTER button and the UP, DOWN, LEFT,
and RIGHT buttons to specify the size of the area and to
position the area. Press the ENTER button again to exit the
AREA setting menu. You can use the SENSITIVITY option to
set the motion detection sensitivity. The higher the setting, the
more sensitive the motion detection.

MOTION DET detects any motion. Set up this function during no human movement to detect break-in. Once detected, an ALARM signal will be given for 5 seconds. As MOTION DET detects any motion, so it can set up the motion detection sensitivity. Select ON... and press [ENTER] and the MOTION DET submenu screen will appear.

(MOTION DET)

AREA USER...

SENSITIVITY L---I---H RET

Press the

ENTER button.

SIZE

LOCATION

23

❖MOTION detection function operates based on the brightness change within the setup region. Therefore, erroneous operation may occur depending on the brightness difference between the background and the object that is being taken, or the status of the area setup, etc.

24