(IRIS/ALC)
|
| Press the | |
BLC | BOTTOM... | ENTER | |
button. | |||
LEVEL | (0) | ||
RET |
|
|
✔WDR
WDR(Wide Dynamic Range) enlarges the advantage of a screen, mostly effective photographing both indoor and outdoor subjects simultaneously. In short, both subjects can be distinctly revived. Select WDR... and press [ENTER] to set up WDR LEVEL and FLICKERLESS.
For items in the BLC menu, the user can set the size and location of the BLC area by pressing [ENTER] key after put the cursor on USER… using the [Left, Right] key. For SIZE items, you can use the [Up, Down, Left, Right] key to designate the SIZE, and then press the [ENTER] key. You can set the location for areas using the [Up, Down, Left, Right] key in the LOCATION.
CAMERA ID | OFF | |
IRIS |
| WDR... |
SHUTTER | OFF | |
AGC | LOW | |
WHITE BAL | ATW1 | |
FOCUS MODE | AF | |
MOTION DET | OFF | |
COLOR/BW | COLOR | |
PRIVACY | OFF | |
SPECIAL | ... | |
PRESET | ... | |
EXIT | QUIT | |
|
|
|
Press the
ENTER button.
(IRIS/WDR)
LEVEL1 | L | I | H |
LEVEL2 | L | I | H |
FLICKERLESS | OFF |
|
|
RET |
|
|
|
E
(IRIS/ALC)
BLC | USER... |
LEVEL | (0) |
RET |
|
SIZE |
|
LOCATION
Press the
ENTER button.
Press the
ENTER button.
SIZE
LOCATION
SIZE
LOCATION
-LEVEL 1 : Controls the shutter speed while WDR operates.
-LEVEL 2 : Controls the whole brightness while WDR operates.
-FLIKERLESS : This is for preventing flicker on the screen when NTSC system is used in 50HZ power supply region and PAL system is used in 60HZ power supply region. That is to prevent shaking on the screen resulted from the discordance of the vertical sync frequency and the flicker frequency of the illumination. While this menu is ON, the electronic shutter is fixed to 1/100sec (NTSC) or 1/120 sec (PAL).
Use [Left, Right] key in the LEVEL menu to control the video output level(brightness).
17 | 18 |
