Samsung SCC-C4253P  SETUP Switch,  Video OUT Port,  Gnd,  Power Connection Port, English

*2 : For short voltage supply during MENU OFF, executes ONEAF and for more than 2 second

*3 : For more than 2 second long voltage supply, moves to the PRESET 0(HOME) position.

7. 5V OUT

Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA.

8. DAY/NIGHT IN

This is a function to receive the external DAY/NIGHT signal from the sensor(option) and convert the signal into BW.

9. RS-485 DATA-

Jack for connection to RS-485 DATA- signal line.

10. RS-485 DATA+

Jack for connection to RS-485 DATA+ signal line.

SETUP Switch

This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears.

 (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the displayed value.

 (Up/Down) : By pressing this switch up or down, you can move up or down on the menu.

: When you press this switch in the menu, the selected function is confirmed. To enter a submenu, press this button.

Video OUT Port

This is connected to the Video Input Port of the monitor and it outputs the Video signals.

GND

This is a grounding port.

Power Connection Port

This is connected to the Power cable.

Power Display LED

When the power is normally connected, the red LED lights.

English _11

English

ENGLISH.indd 11 2009-9-10 13:53:4