Samsung SCC-C4355P user manual Focus Mode, Zoom Speed, Display Zoom, Digital Zoom, Detail, English

FOCUS MODE
You can select a focus mode according to the
angle that you adjusted for camera recording.	DAY/NIGHT	AUTO
- AF : This will monitor the screen continuously
	WHITE BAL
to focus automatically. If you adjust the focus	FOCUS MODE	ONEAF
manually, that will operate the same as in	ZOOM SPEED	[2]
	DISPLAY ZOOM	OFF
<MF>. This will also restore focus after the
	DIGITAL ZOOM	X16
operation of zoom.	DETAIL	[2]
- ONEAF : Restores focus after the operation	V-SYNC	INT
	AGC COLOR SUP	MID
of zoom, and operates the same as in <MF>
unless the operation of zoom is executed.

- MF : You can adjust the focus manually.

M	 While you are working on the following objects, <AF> may not work properly.
	If this is the case, use <MF> instead.
	- Very bright object, or dominant object in a dark scene
	- Object against the rear side of a moist or dirty glass
	- A scene where nearby and distant objects co-exist
	- White wall or single-colored object
	- Venetian blinds and other horizontally striped objects

ZOOM SPEED

You can adjust the zoom operation speed.

DISPLAY ZOOM

You can set to display the zoom status on the screen.

It will disappear in about 3 seconds if the zoom factor has no further change.

DIGITAL ZOOM

You can set the maximum allowable digital zoom ratio.

Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of x43. If you set DIGITAL ZOOM to x16, you can take a shot at up to x688 (43x16). When you set DISPLAY ZOOM as on, you may see zoom value on the screen.

DETAIL

Used to adjust the vertical and horizontal distinction, respectively.

English _25

English

ENGLISH.indd 25 2009-9-10 13:53:5