Samsung SCC-C6453P manual Flickerless, Xdr, Day/Night

ONEAF

OFF

OFF

OFF [2]

INT

WHITE BAL

FOCUS MODE

ZOOM SPEED

DISPLAY ZOOM DISPLAY P/T DIGITAL ZOOM DETAIL V-SYNC

AUTO

DAY/NIGHT

FLICKERLESS

This will prevent possible screen distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting; if set to <ON>, the shutter speed will be fixed to 1/120 second.

If SHUTTER is set to FIX, SENSE UP to FIX, and AGC to FIX, the <FLICKERLESS> menu is not available.

XDR

This will correct a brightness difference between different scenes for the optimal visibility by calculating the ambient luminance contrast in a certain unit of pixels. The higher the value is, the higher the correction level is.

DAY/NIGHT

You can specify a recording mode according to the scene.

For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 18)

1. Select <CAMERA SET> - <DAY/NIGHT>.

2. Select a screen transition mode according to the illumination, and set options as appropriate.

[2]

y DAY : Fixed to DAY mode, regardless of the scene.

y NIGHT : Fixed to NIGHT mode, regardless of the scene.

If BURST is set to <ON>, the burst signal will be output along with the black-and-white composite video signal.

yAUTO : According to the luminance, this

will switch DAY to NIGHT mode, or vice					AUTO
versa.
	BURST					OFF
- BURST : If set to <OFF>, the burst	DAY	¨	NIGHT
						MID
signal will not be output in NIGHT mode.	BRIGHTNESS
	DWELL TIME					2SEC
- DAY¨NIGHT BRIGHTNESS : Specify
	NIGHT¨DAY
the brightness level switching from	BRIGHTNESS					MID
COLOR to BW fi lter.	DWELL TIME					5SEC
	MASK AREA			1 2

Adjusting from HIGH to LOW will cause to switch the fi lter in a darker screen.

-DAY¨NIGHT DWELL TIME : Time required to determine the fi lter switch.

-NIGHT¨DAY BRIGHTNESS : Specify the brightness level switching from BW to COLOR fi lter. Adjusting from HIGH to LOW will cause to switch the fi lter in a darker screen.

English

English _25