Samsung SCC-C6453P manual Auto SET Sets the pattern and scan

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ALARM1

ALARM2

ALARM3

ALARM4

ALARM5

ALARM6

ALARM7

ALARM8

MOTION

AUTO SET

yALARM IN SET : Select the alarm sensor operation between <NO>, <NC> and <OFF>.

yALARM OUT SET : Set the alarm out port matched to the alarm input port.

yAUTO SET : Sets the pattern and scan

action for the corresponding alarm input. When the alarm is generated, the

camera moves to the preset position coupled to the corresponding alarm. Presets 1 ~ 8 are coupled with alarms

1 ~ 8 inputs respectively, and the preset

9 is coupled to the motion detection. The camera stops and remains in the corresponding preset position for the defi ned <DWELL TIME>, and performs

pattern or scan action defi ned by the <AUTO SET>. Setting to <OFF> will discard with the pattern or scan action after moving to the preset position.

-PATTERN 1 ~ 3 : Defi ned pattern action

-HALF1 : Patterns 1 and 2 in serial action

-HALF2 : Patterns 2 and 3 in serial action

-WHOLE : Patterns 1, 2 and 3 in serial action

-SCAN 1 ~ 4 : Predefi ned SCAN action

M The <ALARM1> is used as external switching signal if the <DAY/NIGHT> is set to <EXT>.

English

yAUX OUT CONTROL : Sets whether to sustain the alarm output despite of the alarm generation or to output alarm out signal while the coupled alarm is alive.

When selected <OFF>, outputs alarm only if the alarm is generated. When selected <ON>, it always outputs alarm out signal despite of the alarm generation.

	AUX OUT CONTROL
OUT1		OFF
OUT2		OFF
OUT3		OFF

English _41