Product Appearance | Samsung SCC-C6455N instruction

Product Appearance

English

English _51

00885A-NA_SCC-C6455N-ENG.indb 51

2009-08-05 오후 2:43:

Image 51

Samsung SCC-C6455N user manual Product Appearance

Contents

Smart Dome Camera Overview English Overview FCC Statement Important safety instructions Contents What’s Included Features At a Glance CameraFrame SET Installation Preparing Installation Insert the cable into the Frame SET, and close the Adaptor Screw Fixing Hole Diagram Protective Tape from on the lens Button Frame SET Cover Camera Use SW606, SW605, and SW604 to specify the camera address Initial SetupCamera Address Setup Communication Protocol Setup Factory default is 9600 BPS Baud Rate SetupSetting RS-422A/RS-485 Termination Use pins #5, #6 of SW603 to set the baud rate Same address in the network RS-422A/RS-485 Full Duplex Organization Connecting with Other device Connecting to a monitorVideo terminal on the rear of monitor BNC Cable To connect Alarm To connect Alarm OUTTo connect the controller Connecting the adaptor cable Power SupplyAdaptor Board How to use the keyboard controller Using OSD iconsCamera will resume the last run operation Main Menu  ITS Profile Night VPS You can configure the general settings of the camera moduleCamera SET Camera ID BLC With Backlight set to Iris DNR With this, you can adjust the AGC level of aAGC Motion XDR ShutterSENS-UP Flickerless You can specify a recording mode according to the scene DAY/NIGHTAny excessively bright area in a night scene will be MASKed SET-AUTO SET are not available Auto Switch or Auto FocusWhite BAL  You can specify Mask 1 and 2 simultaneously DAY/NIGHT Digital Zoom Zoom SpeedDisplay Zoom Display P/T POSI/NEGA SyncAGC Color SUP Reverse Advanced You can enable the motion detection and tracking functionsWhen multiple motions continue arbitrarily Intelligent Video Display ResolutionAlarm OUT Privacy Zone Preset Select the preset number Select Position and adjust PANSET. pages 24 ~ You can set the Auto PAN, PATTERN, and Auto Play Auto Pan SetupSettings so define them again after the operation Auto SET Position Direction Left Endless OFF Speed Pattern Setup Scan SetupSelect the Start and move the camera using pan/tilt/zoom ~ 511 for Preset Auto Play Setup Zone SET You can set the north direction and the zone coverageSelect Main MENU-ZONE SET Select Main MENU-ALARM SET Alarm SET  Auto SET Sets the pattern and scan Other SET Clock SET Proportional P/T Factory DefaultsPassword OSD Color Select Main MENU-SYSTEM Info CommunicationSystem Info You can check the system information You can set the language of the user interface Language Function Key Shortcut Keys Specifications Tilt range -6˚~186˚ Preset Pan Speed 600˚/sec, maximumDescription PAN range 360˚Endless Manual Pan Speed 0.01˚~ 180˚/sec Product Appearance 00885A-NASCC-C6455N-ENG.indb 2009-08-05 오후