Samsung SCD107 manual Date/Time, Date & Time

ENGLISH

Advanced Recording

●DATE/TIME

✤The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes.

✤The date and time are automatically recorded on a special data area of the tape.

1.Press the MENU button.

■ The menu list will appear.

2.Turn the MENU DIAL to highlight VIEWER and press the ENTER button.

3.Turn the MENU DIAL to highlight DATE/TIME.

4.Press the ENTER button to select the sub-menu.

5.Using the MENU DIAL, select the DATE/TIME mode.

■ You can choose to display - OFF, DATE, TIME, DATE/TIME

-OFF only

-DATE only

-TIME only

-DATE & TIME

■To return to the previous menu, highlight the DATE/TIME in the middle of OSD and press the ENTER button.

6.To exit, press the MENU button.

Notes

CAM MODE

INITIAL

CAMERA

A/V

MEMORY

VIEWER LCD ADJUST

DATE / TIME TV DISPLAY

CAM MODE

VIEWER SET

LCD ADJUST

DATE / TIME

TV DISPLAY

CAM MODE

VIEWER SET

DATE / TIME

DATE

TIME

DATE&TIME

■The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.

■The DATE/TIME will read “- - -” in the following conditions:

-During playback of a blank section of a tape.

-If the tape was recorded before setting the DATE/TIME in the Camera’s memory.

-When the lithium battery becomes weak or dead.

■Before you use the DATE/TIME function, you must set the Clock. See CLOCK SET on page 39.

53