ENGLISH
Basic Recording
Adjusting the LCD during PLAY
✤You can adjust the LCD during playback.
✤The adjustment method is the same procedure as used in CAMERA mode. (see page 32)
Controlling Sound from the Speaker
The Speaker works in PLAYER mode only.
2
■ When you use the LCD screen for playback, you can hear recorded sound from the
- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode. - Take the following steps to lower the volume or mute the sound while playing a tape
on the camcorder.
1. Set the power switch to PLAYER mode.
2.Press 
(PLAY/STILL) to play the tape.
3.When you hear sounds once the tape is in play, use the MENU DIAL to adjust the volume.
■A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between 00 to 19.
■If you close the LCD while playing, you will not hear sound from the speaker.
VOL/MF
0 : 2 3 : 4 7
5 5 min
Notes
■When the cable is connected to the Audio/Video jack, you cannot hear sound from the speaker or adjust the volume.
■ If a cable is connected to the AV jack, you can hear sound from the speaker when | VOL. | [ 1 1 ] | 1 2 : 0 0 A M | |||
|
|
|
|
| J A N . 1 0 , 2 0 0 4 | |
|
|
|
|
| ||
AV IN/OUT MODE on MENU is set to AV IN.
35
