ENGLISH
6767
Advanced Recording
✤The POWER NITE PIX function works in CAMERAmode.
✤The POWER NITE PIX function can record a subject more brightly in darkness than the NITE PIX function.
✤POWER NITE PIX is displayed for three seconds on the LCD when the SLOW SHUTTER button is pressed in the
NITE PIX mode.
✤When you work in POWER NITE PIX mode, the POWER NITE PIX ( ) appears on the LCD continuously.
1. Set the camcorder to CAMERA mode.
2. Turn on the NITE PIX switch, and then press the SLOW SHUTTER button.
3. Press the SLOW SHUTTER button to set shutter speed (1/30, 1/15, 1/8).
The SLOW SHUTTER function enables you to record a subject at three different brightness
levels.
4. When using POWER NITE PIX the image takes on a slow motion like effect.
5. To cancel the POWER NITE PIX function, press the SLOW SHUTTER button to set to “off ” and
then turn off the NITE PIX switch.
Notes
■The maximum recording distance using the infrared light is about 3 m (about 10 feet).
■If you use the POWER NITE PIX function in normal recording situations (ex. outdoors by day), the recorded picture may
contain unnatural colors.
■In the POWER NITE PIX mode, certain functions are not available, such as White Balance, Program AE, DSE, BLC.
■When the subject is too bright, press the SLOW SHUTTER button (1/30 ➝1/8) to obtain better quality recordings.
POWER NITE PIX
POWER NITE PIX
1 2 : 0 0 A M
J A N . 1 0 , 2 0 0 4
ON OFF
NITE PIX
POWER
00752C SCD303 SEA (60~106) 3/2/04 11:31 AM Page 67