Chapter 5
27
Viewing the Alarm List
Press the “LIST” button located on the front of the system to display up
to eight items of alarm and channel loss information in the current
sequence.
Once the alarm is on, you can check the time the alarm went on along
with the relevant channel. This information remains in nonvolatile
memory so you can check the information even after the system has
been powered off.
If you want to erase the displayed data, press and hold the both of the
“AUTO” and “RESET” buttons for about 2 seconds. Then all the data of
alarm and channel loss will be erased.
NOTE
You cannot use the “LIST” button when the alarm or the system setup mode is
on.
<ALARM/LOSS LIST>
YY/MM/DD HH:MM:SS
1. 99/03 /26 20:10 :24 4 L
2. 99/03 /26 12:19: 34 3 A
3. 99/03 /26 08: 49:58 3 L
4. 99/03 /26 08 :40: 02 1 L
5. 99/03 /26 08 :31: 26 2 A
Occurrence Channel
Occurrence Hour:Minute:SecondOccurrence Year/Month/Date
Channel Occurrence: “A” will
appear in case of an alarm, and “L”
will appear in case of a channel
loss.
Order of occurrence:
The number of the latest
data will be “1”.