Chapter 5
29
3. A green light blinks on the “RESET” button LED.
4. The alarm output becomes TTL “LOW” level.
5. The alarm is disabled automatically after the alarm reset time is
reached.
NOTE
You can set the “ALARM RESET TIME” value in the “ALARM SET” menu.
6. When several alarms are on at the same time, all alarms stop when
the alarm reset time is reached.
7. Press the “RESET” button to disable the alarm manually.
8. When the alarm is disabled, the alarm output becomes TTL “HIGH”
level.
9. When the alarm is disabled, the alarm reset output is maintained for
150ms and then becomes TTL “HIGH” level.
10.The date, hour, and channel number of the relevant alarms are
recorded in the alarm list.
NOTE
Press the “LIST” button to scan this information.
11.When the alarm is disabled, the screen displays the current mode.
Disabling the Alarm
While the alarm is on, you can either press the “RESET” button or wait
for the alarm reset time to be reached to disable the alarm.