User’s Guide
14
Connecting a Monitor
If you connect a monitor to the VIDEO OUTPUT terminal with the
“ ” mark, it is configured as a quarter screen display. If you connect
a monitor to the VIDEO OUTPUT terminal with the “ ” mark, it is
configured as a quarter-section screen, single screen or an automatic
sequence screen.
NOTE
What is Auto Switcher Mode?
This feature allows the unit to switch a single screen from four channels in
sequence.
But when the channel VIDEO LOSS happened or is set to interval time of
“AUTO SWITCHER SET” as “0”, It is skipped.
CHANNEL LOSS or it is set to interval time of all channels as “0” of “AUTO
SWITCHER SET”, it is converted quad screen.
CH1
IN OUT
CH2
IN OUT
CH3
IN OUT
CH4
IN 1 2OUT
VIDEO INPUT VIDEO OUTPUT
1234
Camera
Monitor 1
(Quarter screen
display mode)
Monitor 2
(Auto switching
display mode)