Operating Your Camera
LENS (selection)
This function is used to adjust the brightness of the screen.
1.When the SETUP menu is displayed on the screen, please position the arrow to point to 'LENS' by using the UP and DOWN buttons.
2.Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button.
SETUP
1.LENS DC
2.SHUTTER - - -
DC/VIDEO : Auto iris lens selection
Note
•When using an auto iris lens, the setting of the auto iris lens selection switch, located on the back of the camera, must be on DC or VIDEO depending on the type of the lens which is being used. (Please refer to the picture on page 15)
•The brightness of the screen can be adjusted in DC mode. The brightness can be adjusted within the range of 1~70. The optimum level of brightness for the user can be achieved by adjustment.
MANUAL : Manual lens selection
3. Please press the SETUP button if you wish to return to the previous menu.
COLOR CCD CAMERA 24 User’s Manual
SHUTTER (condition and speed control)
Auto or manual control can be selected.
1.When the SETUP menu is on the screen, please position the arrow to point to 'SHUTTER' by using the DOWN button.
2.Please select the shutter mode by pressing the LEFT or RIGHT button.
FLK | : Please select 'FLK' mode when flickering occurs on the screen, |
| due to an imbalance between illumination and frequency. |
| NTSC Model:1/100, PAL MODEL: 1/120 |
ESC | : Auto control of the shutter speed can be achieved. When ESC |
| mode is on, the speed is controlled automatically according to the |
| brightness of the screen. |
MANUAL : The shutter speed can be controlled manually.
SETUP
1.LENS DC 
2.SHUTTER - - -
3.WHITE BAL. ATW
4.BACKLIGHT OFF
3.Please select 'MANUAL' mode if you wish to adjust the shutter manually.
•You can select speed from ‘1/60’ to ‘1/120,000’sec (NTSC Models), ‘1/50’ to ‘1/120,000’sec (PAL Models).
4.Please press the SETUP button when all the settings are complete.
Note
•When selecting DC/VIDEO lens, the shutter speed is fixed at 1/60 (1/50).
•While using the internal synchronous system, if the shutter setting is on
'ESC' and the camera is directly facing a bright fluorescent light, the image on the screen can be adversely affected. Therefore please choose the installation location with care.
•When 'MANUAL' mode is on, the SENS UP function does not operate.
COLOR CCD CAMERA 25 User’s Manual
