Troubleshooting
If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from.
Problem | Solution |
Nothing appears on | • Please check the power connection. |
the screen. | • Please check the video signal line connection. |
| • Please check and make sure that the auto lens |
| switch is set to DC (VIDEO) when using a DC |
| (VIDEO) lens. |
| • Please check the Brightness of Auto Iris lens. |
|
|
The video image is | • Please check if the lens is clean. |
not clear. | Please clean the lens with a clean cloth or brush. |
| • Please adjust the contrast feature of the monitor. |
| • Please make sure that the screen is not exposed |
| directly to a bright light. |
| Please move the camera if necessary. |
| • Please readjust the back focus of the camera. |
The screen is dark. • Please adjust the contrast feature of the monitor.
•If you have an intermediate device, set the 75Ω/
•Please check if an auto iris lens is being used and adjust the brightness level.
Problem | Solution |
The MOTION | • Please check if 'MOTION DETECTION' mode is |
DETECTION function | turned on. |
is not working. | • Please check if the MD LEVEL is too low. |
| • Please check the setting of the MD AREA. |
|
|
Colors are not quite | • Please check the 'WHITE BAL' setting. (Please |
right. | refer to page 26) |
|
|
The screen is | • Please check if the camera is facing directly into |
flickering. | sunlight or fluorescent light. |
| • Please check if an auto iris lens is being used. |
| • Please check the connection of the lens |
| connector cable. |
|
|
L/L mode isn't able to | • Have you connected your camera to DC power |
be selected. | source? Connect it to AC power source. |
| • Please check the frequency of power supply |
| (60Hz for NTSC, 50Hz for PAL). |
|
|
DAYNIGHT(Auto) | • Please check if the AGC menu is set to the OFF |
mode is not working. | position. |
|
|
• Please check if the AGC menu is set to the OFF | |
not working. | position. |
| • Please check if the SHUTTER menu is set to |
There is a problem with the camera operation. The camera surface is too hot and black stripes appear on the screen.
•Please check if an appropriate power source to the camera complies with the manufacturer's standard requirement, or if the voltage keeps changing.
MANUAL mode. |
• Please check the limit of |
COLOR CCD CAMERA 38 User’s Manual
COLOR CCD CAMERA 39 User’s Manual
