Operating Your Camera
HIGH/MIDDLE/LOW : You can adjust the sensitivity of Backlight Compensation. 
OFF BACKLIGHT function does not operate.
BACKLIGHT ON | BACKLIGHT OFF |
AGC (Auto Gain Control)
1.Please position the arrow to point to 'AGC' on the SETUP menu by using the UP and DOWN buttons.
2.Please select the mode you wish to operate by pressing the LEFT or RIGHT button. As the level of gain increases, the screen gets brighter and the level of noise also increases.
HIGH : The gain increases or decreases within the range of 6dB ~ 34dB.
NORMAL : The gain increases or decreases within the range of 6dB ~ 30dB.
OFF : The gain is fixed at 6dB.
SETUP
1.LENS | DC |
2.SHUTTER | - - - |
3.WHITE BAL. | ATW |
4.BACKLIGHT | OFF |
5.AGC | NORMAL |
6.SSNR | LOW |
OFF | |
8.SPECIAL |
|
9.EXIT |
|
COLOR CCD CAMERA 28 | User’s Manual |
3.Please press the SETUP button. The BRIGHTNESS can be adjusted within the range of 1~70.
4. Please press the SETUP button when all the settings are complete.
SSNR (Samsung Super Noise reduction)
The background noise in the low light level decreases automatically as the level of gain changes.
1.Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DOWN buttons.
2.Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
SETUP
1.LENS DC
2.SHUTTER
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL 
6.SSNR LOW
OFF : There is no reduction in noise level.
LOW : There is a small reduction in noise level with almost no ghost image.
MIDDLE : The most effective mode. There is a sufficient reduction in noise levels without causing much ghost imaging.
HIGH : The level of noise is reduced greatly, however there is an increase in ghost imaging.
Note
• When AGC is turned off, SSNR does not operate.
COLOR CCD CAMERA 29 User’s Manual
