Samsung SDZ-300 instruction manual Connection, Connecting to Monitor, Connecting to Power

Overview

Power Input Terminal

Power supply terminal (DC12V±10%).

Power LED

Illuminates when power is supplied.

Video Output Jack

Used to connect an external video monitor in jack.

Communication Control Connector

Used to connect the Remote Controller (Optional). Includes external 'SYNC' signal input pin, which is used for the line lock function.

Includes the RS-485 communication pin.

External Control Connector

Relates to the motion detection output signal.

Zoom and focus functions can be controlled using external siganals.

Connection

Connecting to Monitor

Connect Video Out Jack to the monitor's Video In jack as shown below.

CCD Camera Monitor

•Connection methods may vary depending on the video equipment. Please refer to the model specific instruction manual.

•Connect cables with the unit powered down.

COLOR CCD CAMERA 14 User’s Manual

• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device.

CCD Camera

Intermediate End monitor

Connecting to Power

Each model has a different power input specification.

Please check the model type and standard power requirement before connecting to power.

DC Power Type (DC 12V, 500mA)

Use DC 12V/500mA power source for SDZ-300ND/PD.

Power Input Terminal

AC/DC Power Type

Use AC24V/500mA or DC 12V/500mA power source for SDZ-300N/P.

Notes

•Connect the power once the installation is complete.

•The wire is polarized. Match '+' and '-' terminals properly.

COLOR CCD CAMERA 15 User’s Manual