High, Middle, Low, Off | Samsung SDZ-300 specification

Operating Your Camera

•A.FLK (NTSC: 1/100, PAL: 1/120): Flicker-free mode

•ESC: Automatic shutter speed setting (optimal)

•MANUAL: Manual shutter speed setting

2.If you choose ‘MANUAL’, select the optimal shutter speed.

·In MANUAL mode, the optimal shutter speed needs to be designated. Select from 1/60 to 1/120,000 (NTSC) or from 1/50 to 1/120,000 (PAL).

*'Sens-Up' mode can be configured manually (2x to 128x).

·Verify changes made to the shutter speed by referencing to changes in on screen brightness.

3. Press the SET button to complete.

Notes

•Image may become unstable if the camera is set to 'ESC' mode and faces a strong fluorescent light.

•Under 'ESC' mode, the brightness can be adjusted using the LEFT or RIGHT button.

•The WDR feature is not available under MANUAL mode.

•Sens-up is disabled under 'MANUAL' or 'A.FLK' mode.

COLOR CCD CAMERA 32 User’s Manual

AGC (Auto Gain Control): For brighter images.

1.Position the indicator over 'AGC' using the UP or DOWN button.

2.Set 'AGC' to the desired mode using the LEFT or RIGHT button.

•HIGH	: Wide range gain value adjustment
•MIDDLE	: Middle range gain value adjustment
•LOW	: Narrow range gain value adjustment
•OFF	: Disabled
	EXPOSURE	SETUP
	BRIGHTNESS	50
	IRIS	AUTO
	SHUTTER	---
	AGC	MIDDLE
	SSNR	MIDDLE

SSNR(Samsung Super Noise Reduction): On screen noise reduction.

1.Position the indicator over 'SSNR' using the UP or DOWN button.

2.Set 'SSNR' to the desired mode using the LEFT or RIGHT button.

•LOW	: Low noise reduction
•MIDDLE : Medium noise reduction
•HIGH	: High noise reduction
•OFF	: Disabled

EXPOSURE	SETUP
BRIGHTNESS	50
IRIS	AUTO
SHUTTER	---
AGC	MIDDLE
SSNR	MIDDLE
SENS-UP	AUTO
COLOR CCD CAMERA 33	User’s Manual

Image 17

Samsung SDZ-300 instruction manual High, Middle, Low, Off

Contents

Sales Network About this manual Correct Disposal of This Product Features Contents Do not install in high humidity environment Precautions Top OverviewTripod Mounting Bracket Screw Hole Used to fix tripod mounting bracket on top of the camera Key Buttons Bottom BackTripod Mounting Hole To see a far object clearly Connection Connecting to MonitorConnecting to Power Function Connecting to connectionZoom Focus Menu Setup Menu ConfigurationOperating Your Camera Use the six buttons on back of the camera Correcting Mistakes Cam Title Set White BAL using the Left or Right button When completed, move the cursor to END and press SET buttonWhite Balance Control Three white balance control modes are as follows Backlight Tips on Using the Motion Detection FeatureMotion Detection On Any motion in the selected areas is observed Can be manually adjusted, independent of moving zoom ONE Push Focus is automatically adjusted just oncePress the SET button Moving zoom Fast To move zoom fast END To revert to the main setup menu Auto The iris is automatically activated upon illumination Shutter Control image brightness by adjusting shutter speedPress the SET button to confirm Middle HighLOW OFF User Preset OFF Disabled END Revert to the Special Setup menu Preset Clear Clear configured preset TOP Area SELBottom Left To finish setup menu To reset your camera to factory default conditionCAM ID Assign an ID number to the camera 1 to RET PKT Used to transfer a packet Troubleshooting SDZ-300PD Specifications Focus Far ResetFocus Near Zoom Wide OSD Menu On/Off OSD Menu Down OSD Menu UpOSD Menu Left OSD Menu Right Signature Full Name 89 / 336 / EEC Manufacturers Name Manufacturers AddressPosition Place Memo