Instruction: Connection

Connecting a Monitor

Connect the video output port located on the back of the product to a monitor.

CCD Camera

Monitor

The actual connection method depends on the peripherals; please refer to the manual of the device being connected for more details.

Please make sure all the power is OFF from all relevant devices before making any connections.

Set the 75/ Hi-Z diverter switch of the intermediate video receiver to Hi-Z, and set the end unit device to 75.

CCD Camera

Intermediate

End monitor

COLOR CCD CAMERA 18 User’s Manual

Connecting the Power

Power requirements depend on the model; please check the product model number and its stated power requirements.

The power connection method is as shown below.

Using DC Power

Use the adapter provided with this product.

When the resistance of the copper wire is 20˚C(68˚F)

Copper wire size(AWG)

#24(0.22mm2)

#22(0.33mm2) #20(0.52mm2)

#18(0.83mm2)

Resistance value(/m)

0.078

0.050

0.030

0.018

Voltage drop(V/m)

0.028

0.018

0.011

0.006

As shown in above chart, the voltage drops depending on the length of the wire. If the adapter output cable is too long, therefore, it may interfere with the camera operations.

Guaranteed operating voltage of the camera: DC12V 10%

Actual voltage may vary from the above chart depending on the manufacturer or model.

COLOR CCD CAMERA 19 User’s Manual

Page 10
Image 10
Samsung SHC-750 user manual Instruction Connection, Using DC Power