Samsung SHR-3010P manual 7Reservation Record Setup, Size, Left, Move

DIGITAL VIDEO RECORDER

GB GB

7Reservation Record Setup

AREA=2

[SIZE][MOVE]

The following illustrates the intial setting of the TIMER RECORD SETUP menu.

LEVEL=OFF

TIMER RECORD SETUP

AREA 2

TIMER

DAY

START

END

FIELD RATE

OFF

---

--:--

--:--

--.--

OFF

---

--:--

--:--

--.--

OFF

---

--:--

--:--

--.--

OFF

---

--:--

--:--

--.--

OFF

---

--:--

--:--

--.--

OFF

---

--:--

--:--

--.--

OFF

---

--:--

--:--

--.--

OFF

---

--:--

--:--

--.--

3) SIZE

OFF

---

--:--

--:--

--.--

Set the size of the area currently selected. Press the UP( ) button to increase the size of

the area vertically, or press the DOWN(

) button to decrease the size of the area vertically.

Press the RIGHT(

) button to increase the size of the area horizontally, or press the

●

Timer recording enables the system to automatically record when you are not present so that

LEFT(

) button to decrease the size of the area horizontally. After setting the size, press

the recording is performed on the desired day at the desired time with the desired field rate.

the SET/STILL(

) button to move the curstor so that you can set the MOVE item.

First position the cursor at the line where TIMER row is set to OFF to set it to ON, select

the desired day from the DAY row, and enter the recording start and end time into START

and END row respectively. Also, set the field rate to be applied during recording in the

AREA=2 LEVEL=MIDDLE

[MOVE]

FIELD RATE row. If you set the DAY from SUN to SAT, the timer recording setting is

[SIZE]

applied only to the corresponding days, but if you set it to DAILY, the timer recording

setting is applied to all days of the week. FIELD RATE can be set from 0.50 FPS to 60 FPS

if the input video signal is NTSC and from 0.50 FPS to 50 FPS if it is PAL. Once the timer

recording is set, the recording will be made on the corresponding day for the duration of

entered time. Other recording settings, except the field rate, follow the basic recording

settings. To force stop the recording, press and hold the STOP(■ ) button for 3 seconds.

Then, the recording will pause for 5 seconds. If no action is performed by the user for 5

4) MOVE

seconds, the system determines whether the timer recording setup time is elapsed and

resumes the recording it not. To completely stop the recording, go into the menu within 5

Set the position of the area currently selected. Press the UP(

) or DOWN(

) button to

seconds to set the TIMER item of the corresponding line to OFF.

change the position of the area vertically, or press the LEFT(

) or RIGHT(

) button

Timer recording can be set for up to 11 different times.

to change the position of the area horizontally. After setting them all up, press the

SET/STILL(

) button to move the cursor to the AREA item so that you can set each

item for other areas.

AREA=2 LEVEL=MIDDLE [SIZE]

[MOVE]

3-21 3-22