Network

You can configure the network-related settings. For more details, see Chapter 5, “Menu Setup.”

-Network Password

You can set both Admin password and user password for connecting to the DVR system through the network using Smart Viewer.

For the network password, you can

CAUTION input numeric values only up to 8 digits.

If you leave the password blank and apply it, a warning message appears to ask you to retype it.

The Delete key and key combinations like CTRL+C and CTRL+V in the keyboard are not supported for input of password.

For deletion of any input value, use the BACKSPACE key.

The default Admin password is “4321.”The default user password is also “4321.”-IP SettingsIt configures the network IP settings for the DVR.
Be sure to inquire of the networkCAUTION manager about the settings.

Both ADSL ID and password can be input up to 40 letters including alphabets, numbers, and special characters.

- Transfer Protocol SettingsYou can change the transfer protocol-related settings-Callback SettingsYou can configure the callback-related settings for DVR.-Picture Settings

This configuration is used to set the video size and quality for transferring pictures.

54_ Smart Viewer