6It displays whether the PTZ controls are active.

If you have set PTZ cameras for the DVR, “PTZ” is displayed on the screen. Select a PTZ camera channel and use the PTZ button for camera control.

SPLIT-SCREEN

You can change the split mode by clicking each number icon.

SINGLE MODE QUAD MODE NINE MODE SIXTEEN MODE

• Clickbutton.
The screen displays the selected camera connected to the DVR in “SINGLE MODE”.

• Click

button.

The screen displays the selected camera connected to the DVR in “QUAD MODE”.

• Click

button.

The screen displays the selected camera connected to the DVR in “NINE MODE”.

• Click

button.

The screen displays the selected camera connected to the DVR in “SIXTEEN MODE”.

FULL SCREEN MODE

• Click button.

The screen displays the selected camera connected to the DVR in “FULL SCREEN MODE”. To back to the previous mode, press the ESC key.

CONNECTED DVR

This displays the IP address and the status of the

11

VIEWERWEB

connecting DVR.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•Connection failure messageNo Response : Appears when the DVR does not respond.Wrong ID : Appears when the input ID is wrong.Wrong Password : Appears when the input password is wrong.Wrong Port Number : Appears when the port number is wrong.

Collision : Appears when Admin mode is already in use or simultaneous access to the same DVR from the PC.

User Full : Appears when the maximum number of users is exceeded.

•The numbers of simultaneous connection are 3 which includes the users for SmartViewer.

Web Viewer _73