Samsung SHR-5082P/XEG manuals
Home Audio > Soundbar/SoundTower
When we buy new device such as Samsung SHR-5082P/XEG we often through away most of the documentation but the warranty.
Very often issues with Samsung SHR-5082P/XEG begin only after the warranty period ends and you may want to find how to repair it or just do some service work.
Even oftener it is hard to remember what does each function in Soundbar/SoundTower Samsung SHR-5082P/XEG is responsible for and what options to choose for expected result.
Fortunately you can find all manuals for Soundbar/SoundTower on our side using links below.
Samsung SHR-5082P/XEG Manual
109 pages 0 b
1 SHR-5080/5082SHR-5160/5162 register your product at www.samsung.com/global/register 2 key features of your DVRWHAT’S INCLUDED WITH YOUR DVR 3 safety regulations4 before startWARNINGBattery System Shutdown Operating Temperature STANDARDS APPROVALS 5 contents6 SEARCH AND PLAYSMART VIEWER WEB VIEWER APPENDIX 7 CONTROLS ON THE DVR8 1.ALARM LEDHDD LED NETWORK LED BACKUP LED REC LED 2.PTZ Button ZOOM(TELE) Button FREEZE(WIDE) Button SEARCH(VIEW) Button MENU(PRESET) Button 3.REC Button (Step Rewind/Fast) Button Step Rewind: Fast Rewind: (STOP) Button (PLAY/PAUSE) (Fast/Step Forward) Button Fast Forward: Step Forward: 4.Direction Buttons Buttons 5.MODE Button AUDIO Button ALARM BACKUP Button 6.USB Port Port 7.Channel Button Button 8.OPEN Button 9.Power LED Power 04_ introducing 9 REAR PANEL JACKSUsing the NUMERIC Buttons 10 CONTROL REMOTE12 installationCHECKING INSTALLATION ENVIRONMENT HDD ADDITION 18 connecting with other devicesThe illustrations are described based on SHR-5162 CONNECTING VIDEO, AUDIO, AND MONITOR CONNECTING THE NETWORKConnecting to Internet through Ethernet (10/100BaseT) Connecting to Internet through ADSL 19 CONNECTING THE USBCONNECTING THE ALARM INPUT/OUTPUT 20 CONNECTING THE RS-485DEVICE 21 liveOPERATING THE SYSTEM LIVE SCREEN MODE 23 SETTING AUDIO ON/OFFAudio On/Off setting in full screen mode Audio On/Off setting in 16-splitmode Audio On/Off setting in 4, 6, 7, 8, and 9-splitmodes and PIP mode 24 FREEZING AND ZOOMINGFreeze function Zoom function EVENT MONITORING[ Event-drivenscreen changes in Event Monitoring ] 25 SPOT-OUTMONITORING26 menu setup41 backupTo configure the related settings 42 PTZ camera control45 recordingREC (NORMAL RECORDING) RECORD SCHEDULE 46 search and playCALENDAR SEARCHTo perform a calendar search EVENT SEARCHTo perform an event search 47 DATE TIME SEARCHTo perform a date/time search GO TO FIRST SEARCH 48 GO TO LAST SEARCHBACKUP SEARCH PLAYBACK49 Playback modeSingle screen: 4-split screen: 9-split 16-split PIP screen: UP/ DOWN N+1 split screen: can set the location of the play channel from the menu Speed play Fast Forward Fast Rewind Viewing still images Audio playback Audio data can be played or recorded only in search & play _45 50 Smart ViewerINTRODUCTION MAIN FEATURES PC SPECIFICATION (RECOMMENDED) Smart Viewer INSTALLATION 51 Smart Viewer PROGRAM EXECUTION52 Smart Viewer INITIAL SCREENSETUP MODE53 DVR Setup54 For more details, see Chapter 5, “Menu Setup.”-Admin Password -User Password For the system password, you can CAUTION input numeric values only up to 8 digits The Delete CTRL+C CTRL+V For deletion of any input value, use the BACKSPACE key The default system password is “4321.” -Date/Time Setup -System Language You can set the display language for the DVR Language specification is subject to change 50_ Smart Viewer 55 -Storage Setup-Remote Control Device Camera -Camera Configuration Only English is available for the title retype it You can input the title up to 15 digits Smart Viewer _51 56 -PTZ DeviceMonitoring Setup Recording -Record Quality and Auto Deletion You can configure the settings for recording quality and auto deletion -Record Rate & Video Size NTSC PAL -Event Record Duration You can configure the pre-eventand post- event settings for event recording 52_ Smart Viewer 57 Schedule_53 58 Network-Network Password For the network password, you can The default Admin password is “4321.” The default user password is also “4321.” -IP Settings It configures the network IP settings for the DVR Be sure to inquire of the network CAUTION manager about the settings - Transfer Protocol Settings You can change the transfer protocol-relatedsettings -Callback Settings You can configure the callback-relatedsettings for DVR -Picture Settings 54_ Smart Viewer 59 Viewer Setup60 Site Setup61 URLAddress Type Smart Viewer can monitor up to 16 channels at the same time Smart Viewer can search or play one channel only The audio does not play To delete an existing DVR, click Delete To edit the existing DVR, click Modify After modifying the settings, click OK When the DVR to be modified is connected to SMART Smart Viewer, the following message appears If you really want to modify the DVR, disconnect the DVR and retry to modify it Site List To add a new site, click New Smart Viewer _57 62 S/W Version 63 MONITORING MODE70 SEARCH MODE71 Remote ModeCalendar Window Audio Volume, Video Brightness/ Contrast Buttons Video Save (Backup)/Video Conversion/Print/Setup72 2.File Conversion buttonTo perform this function a.Click Open to select a DVR file to be converted b.Select JPEG Frame or AVI Video c.Click Start to convert the file. To stop conversion, click Stop JPEG Frame >Viewer Setup > File Converting > Jpeg Location AVI Video >Viewer Setup > File Converting > AVI Location 3.Print button This button prints the playback screen that is now being displayed 4.Setup Mode button This button brings up the Setup Mode window 5.Play buttons 1.Reverse Play: Performs Reverse Play 2.Play: Performs playback 3.Fast Backward: Reverse-playsfaster 4.Stop: Stops playing 5.Fast Forward: Plays faster 6.Go to Last: Plays the latest (last) image in the time line 7.Step Backward: Performs one step reverse-playby one second 8.Step Forward: Performs one step forward by one second 9.Go to First: Plays the first image in the time line 68_ Smart Viewer 73 6.Time Line[Normal mode] The highlighted time bar displays the time range of the video image The time lines display the time division If you double-clickan area of a time bar, it changes to the extension mode One column of time line represents one hour [Extension Mode] Displays the time line of one hour before Displays the time line of one hour after If you double-clickan area of a time bar, it changes to the normal mode Each time line represents 5 minutes 7.Next button It operates the same as the Next button in the Monitoring mode 8.Reload button It renews the recording time information in both the calendar and time line 9.Local Mode :Click this button to change to the Local mode Smart Viewer _69 74 Web Viewer86 appendixPRODUCT SPECIFICATIONDetails Notes Operating System Embedded OS Broadcasting NTSC / PAL System Input Voltage AC 100 ~ 230V (PAL) AC 110 ~ 220V (NTSC) Power Usage Video Video Input Composite 16(8) Channel - 1.0Vp-p - 75Ω Hi Z Termination BNC Type Loop Through Out 16(8) Channel - Auto Termination Video Output Composite 3 Channel - Normal Video Output 1 Channel - Spot Output 2 Channel - BNC Type S-Video1 Channel VGA 1 Channel Audio Input Mono 4 Channel - -5dBm,600Ω RCA Type Audio Output Mono 1 Channel - -6dBm Live Screen Resolution & Frame Speed Display Mode Single Screen Split Mode: SHR-5160/5162 :4, 6, 7, 8, 9, 16 split SHR-5080/5082 :4, 6, 7, 8, 9 split Mode sequence Freeze 2 X Zoom 87 CompressionMethod Audio : ADPCM Specs Mode Programmed Recording Schedule Table -AlarmDetection -MotionDetection -VideoLoss -Pre& Post Recording NTSC : 0.9 / 1.8 / 3.7 / 7.5 / 15 / 30ips ips (True Recording ips: 0.938/1.875/3.75/7.5/15/30ips) PAL : 0.7 / 1.5 / 3.1 / 6.2 / 12.5 / 25ips Save Internal SHR-5162/5082 :ATA HDD x 3(MAX) SHR-5160/5080 :ATA HDD x 4(MAX) External USB HDD -MAX1 (Not support USB hub) -MAXHDD Size : 500GB Play Back Search Mode Calendar search Event search - Alarm, Motion, Video Loss Date/time search Initial search Latest search Backup search Total ips(CIF) 60/50ips (Half D1) 88 Single 1Channel Decoding16 split (played cameras10-16) 9 split (played cameras 5-9) 4 split (played cameras 2-4) PIP 1 Channel Decoding + 1Channel Live Triplex 9 split 8 Channel Live + 1Channel PB Play Mode Play, Pause, Stop, 2x Digital Zoom Fast Forward/Fast Reverse Backup USB External HDD USB CD/DVD Writer, Internal DVD (SHR-5162/5082only) USB memory Network Ethernet : 10/100 Base T, ADSL(PPPoE), DHCP Serial RS-485 PTZ Device Control Communication Remote Control Device Input : SHR-5160/5162 :16 Channel SHR-5080/5082 :8 Channel Output : 4 Channel Support external alarm reset Remote PC Detailed CPU : Pentium III, 1GHz or higher Viewer RAM : SDRAM 256MB or higher Graphic Accelerator : Graphic Memory 32MB or higher DirectX : 8.1 or higher Supported Win2000, WinXP Operating Systems Function Live Image Monitoring Mode Local File Search & Play Back Mode Remote File Search & Play Back Mode Operating Temperature Storage Temperature Operating Humidity 20% to 85% RH Storage Humidity Size (W x H x D) 430 x 88 x 400mm (16.93 x 3.46 x 15.75 inch) Weight SHR-5162/5082 :~ 7.6kg(16.75 lb) SHR-5080 :~6.7kg(14.77 lb) SHR-5160 :~6.8kg(14.99 lb) 89 OUTLINE DRAWINGS93 FACTORY DEFAULTClassification Detailed Items Factory Setup System Time/Date/Language Date Format YYYY-MM-DD Time Format 24 Hours Language English DST Password Lock Record Lock HDD Mode HDD repeat record Overwrite HDD ending alarm Camera Config CAM_01 to CAM_16 (SHR-5082/5080 :8) Auto Seq 5 sec PTZ Device Camera No Protocol Baudrate Parity Data Stop Serial Mode Half Duplex Screen Setup Brightness Contrast Color 94 MonitoringEvent Monitoring Date OSD Display Time Status Spot Out Channel CH1 Spot Out Event Monitor Monitor Out Dual Out Play channel location Lower right-handcorner Multi-channelchange 5 seconds Record Mode Record Quality & Auto Normal Quality Deletion Event Quality Auto Deletion Record Rate & Video Normal Rate Size Event Rate Video Size CIF Event Record Duration PreEvent PostEvent 1 min Record Continuous Recording Schedule Event Record Sensor State Detection Setup Motion Detection Setup M.D State Area All Area Sensitivity Very High Video Loss Detection 95 appendix _9196 TROUBLESHOOTING (FAQ)PROBLEM SOLUTION The system power is dead and Please check the power connection LEDs on the front of the set do not Check the power voltage operate at all or exchange the power supply Video data remains in the system Check the image of the camera connected to the but some channels display no system. Improper input of camera may cause this video data but turns all blue symptom Check the camera power supply Sometimes, you see this symptom when the video data is connected with multisystems and the video signal from the video data distributor in use is weak If it’s the case, you shall connect the camera images with your DVR directly to check or correct the The RECORD button is pressed Please check the HDD space but the REC LED does not light and Please check the Record Mode setup in MENU recording is not active It should be On Although all the LED operate on the Please make sure the cable is connected. Video front panel, the screen is blink or out may come out differently with the connected the display quality is low monitor. In short, Video Out is set to Composite Output but connected to VGA Input Monitor or vice versa. Then, keep pressing both the MODE button and the ZOOM button for 5 seconds to change the Video Out mode You may experience low display quality while the dual video output is in use. In this case, please switch it to the composite or VGA video output The LEDs blink and the logo screen This symptom may be resulted from the failure repeatedly appears of HDD connection inside the DVR. Take off the cover and check HDD connection status. If HDD connection has no problem, please consult with the dealer You cannot enter MENU by forgotten password the values set at the factory. Keep pressing both the MODE button and the PTZ button for 5 seconds The default password is “4321.” The channel button does not If the current screen is in Event Monitoring, the operate in Live mode channel button does not operate Then, press the ALARM button to terminate the current screen and select a channel The cursor cannot reach the Please check both the channel and date are left starting point during Calendar checked. Both shall be checked for play with Start Search The cursor cannot reach the unrecorded date 97 Alarms keep continuously issued Press the MENU button and do the following: so you cannot cancel using the 1) To cancel Event Monitoring: Monitoring > Event ALARM buttonMonitoring Duration Off 2) To cancel Buzzer: Event Record > Alarm (Motion 2) To cancel Buzzer:Detection/Video Loss) > Alarm-Out 3) To cancel Event: Event Record > Alarm (Motion 3) To cancel Event:Detection/Video Loss) > State Off Pressing the PTZ button in Live Check the Protocol and other setup values through mode receives no responseMenu > Camera > PTZ Device match with the PTZ match with the PTZ camera When you connect several It requires time to recognize several armored HDDs IEEE1394 armored HDDs to the Please try again in a few minutes. If retrial makes no DVR through Menu, the DVR cannot improvement, HDD could be abnormal recognize all the HDDs Please exchange the HDD “CLOCK BATTERY HAS FAILED” is This message is displayed if the internal clock in displayed on the screen DVR has problem You cannot connect to the DVR through Smart Viewer your DVR. The DVR allows no more than 3 users’ connection with Smart Viewer at a time Check the Network setup of your DVR Check Network cable connection please check if you get the right DVR MAC Address If your DVR is connected to the ADSL network please check if the bandwidth is set below Kbps. If the Bandwidth for ADSL is set to high, the connection with Smart Viewer may be instable due to the heavy network load because the ADSL speed is low Smart Viewer in operation is If you change information such as time, network disconnected setup, HDD format, Default Setup, or HDD attachment or detachment for your DVR, the current Smart Viewer will be automatically disconnected Check the network connection. Smart Viewer, if disconnected from the network, will try reconnection up to 5 times. If it remains unconnected after 5 time trials, it will automatically give up connection As far as your DVR is connected to the ADSL network, you may be disconnected from Smart Viewer when the network conditions go worse 98 The Audio icon of Smart Viewer If your PC has no Audio driver or has some problem is left deactivated in Live mode with Audio play by an Audio driver, the Audio icon Setting Audio to On in the Camera will be deactivated. Please check Audio driver menu of your DVR will make no installation status difference When selecting the channel which PTZ control is available in both Smart Viewer and PTZ Camera is connected to in your DVR. Other user might control the PTZ for your the Live mode of Smart Viewer DVR to terminate the PTZ Camera Menu or Auto click the “Menu Control” button Pan/Scan/Pattern motions while you select the other among PTZ setup buttons to enter channel. This may cause the initialization the Function Menu mode in PTZ Camera, and return from the other channel, the PTZ related buttons have been initialized No Time Bar in the Search Time Line can be converted into 2 modes, General (24 Hour Display) and Extension (2 Hour Display). In Extension mode, Time Bar may not be seen in the current time. Please enter General mode or click the LEFT or RIGHT button to search Time Bar “NO HDD” icon and error message Please check the HDD connection status. If this pops up problem persist without connection failure, contact the technical support for checking hard disk DVR device does not show what has been upgraded after adding a is one of the devices listed on the compatibility list hard disk of HDDs. The list of the compatible devices with Samsung DVR can be obtained from your vendor The connection status is not shown after connecting the external one of the storage devices listed on the compatibility storage device, USB memory, USB list of storage devices. The list of the compatible HDD and such devices with Samsung DVR can be obtained from your vendor Pressing the ESC key in “FULL SCREEN MODE” of WebViewer and then press ESC key again. It will be changed does not work to change into into normal split mode normal split mode 99 OPEN SOURCE LICENSE REPORT ON THE PRODUCT
109 pages 30.39 Mb
93 pages 25.25 Mb
93 pages 24.52 Mb
1 SHR-5082SHR-5162 register your product at www.samsung.com/global/register 2 key features of your DVRWHAT’S INCLUDED WITH YOUR DVR 3 safety regulations4 before startWARNINGBattery System Shutdown Operating Temperature STANDARDS APPROVALS 5 contents7 introducing your real time DVRCONTROLS ON THE DVR8 3.REC Button(Fast/Step Rewind) Button Step Rewind: Fast Rewind: (STOP) Button (PLAY/PAUSE) Button (Fast/Step Forward) Button Fast Forward: Step Forward: 4.Direction Buttons Buttons 5.MODE Button AUDIO Button ALARM BACKUP Button 6.USB Port Port 7.Channel Button 8.Eject Button 9.Power LED LED Power 04_ introducing 9 REAR PANEL JACKSUsing the NUMERIC Buttons 10 CONTROL REMOTE12 installationCHECKING INSTALLATION ENVIRONMENT HDD ADDITION 16 connecting with other devicesThe illustrations are described based on SHR-5162 CONNECTING VIDEO, AUDIO, AND MONITOR CONNECTING THE NETWORKConnecting to Internet through Ethernet (10/100BaseT) Connecting to Internet through ADSL 17 CONNECTING THE USBCONNECTING THE ALARM INPUT/OUTPUT 18 CONNECTING THE RS-485DEVICE 19 liveOPERATING THE SYSTEM LIVE SCREEN MODE 21 SETTING AUDIO ON/OFFAudio On/Off setting in full screen mode Audio On/Off setting in 16-splitmode Audio On/Off setting in 4, 6, 7, 8, and 9-splitmodes and PIP mode 22 FREEZING AND ZOOMINGFreeze function Zoom function EVENT MONITORING[ Event-drivenscreen changes in Event Monitoring ] 23 SPOT-OUTMONITORING24 menu setup39 backupTo configure the related settings 40 PTZ camera control43 recordingREC (NORMAL RECORDING) RECORD SCHEDULE 44 search and playCALENDAR SEARCHTo perform a calendar search EVENT SEARCHTo perform an event search 45 DATE TIME SEARCHTo perform a date/time search GO TO FIRST SEARCH 46 GO TO LAST SEARCHBACKUP SEARCH PLAYBACK47 Playback modeSingle screen: 4-split screen: 9-split 16-split PIP screen: UP/ DOWN N+1 split screen: can set the location of the play channel from the menu Speed play Fast Forward Fast Rewind Viewing still images Audio playback Audio data can be played or recorded only in search & play _43 48 Smart ViewerINTRODUCTION MAIN FEATURES PC SPECIFICATION (RECOMMENDED) Smart Viewer INSTALLATION 49 Smart Viewer PROGRAMEXECUTION 50 Smart Viewer INITIAL SCREENSETUP MODE51 DVR Setup52 For more details, see Chapter 5, “Menu Setup.”-Admin Password -User Password For the system password, you can CAUTION input numeric values only up to 8 digits The Delete CTRL+C CTRL+V For deletion of any input value, use the BACKSPACE key The default system password is “4321.” -Date/Time Setup -System Language You can set the display language for the DVR Language specification is subject to change 48_ Smart Viewer 53 -Storage Setup-Remote Control Device Camera -Camera Configuration Only English is available for the title retype it You can input the title up to 15 digits Smart Viewer _49 54 -PTZ DeviceMonitoring Setup Recording -Record Quality and Auto Deletion You can configure the settings for recording quality and auto deletion -Record Rate & Video Size NTSC PAL -Event Record Duration You can configure the pre-eventand post- event settings for event recording 50_ Smart Viewer 55 Schedule_51 56 Network-Network Password For the network password, you can The default Admin password is “4321.” The default user password is also “4321.” -IP Settings It configures the network IP settings for the DVR Be sure to inquire of the network CAUTION manager about the settings - Transfer Protocol Settings You can change the transfer protocol-relatedsettings -Callback Settings You can configure the callback-relatedsettings for DVR -Picture Settings 52_ Smart Viewer 57 Viewer Setup58 Site Setup59 Use DDNSURL Smart Viewer can monitor up to 16 channels at the same time Smart Viewer can search or play one channel only The audio does not play To delete an existing DVR, click Delete To edit the existing DVR, click Modify After modifying the settings, click OK When the DVR to be modified is connected to Smart Viewer, the following message appears If you really want to modify the DVR, disconnect the DVR and retry to modify it Site List To add a new site, click New Smart Viewer _55 60 S/W Version 61 MONITORING MODE68 SEARCH MODE69 Remote ModeCalendar Window Audio Volume, Video Brightness/ Contrast Buttons Video Save (Backup)/Video Conversion/Print/Setup70 2.File Conversion buttonTo perform this function a.Click Open to select a DVR file to be converted b.Select JPEG Frame or AVI Video c.Click Start to convert the file. To stop conversion, click Stop JPEG Frame >Viewer Setup > File Converting > Jpeg Location AVI Video >Viewer Setup > File Converting > AVI Location 3.Print button This button prints the playback screen that is now being displayed 4.Setup Mode button This button brings up the Setup Mode window 5.Play buttons 1.Reverse Play: Performs Reverse Play 2.Play: Performs playback 3.Fast Backward: Reverse-playsfaster 4.Stop: Stops playing 5.Fast Forward: Plays faster 6.Go to Last: Plays the latest (last) image in the time line 7.Step Backward: Performs one step reverse-playby one second 8.Step Forward: Performs one step forward by one second 9.Go to First: Plays the first image in the time line 66_ Smart Viewer 71 6.Time Line[Normal mode] The highlighted time bar displays the time range of the video image The time lines display the time division If you double-clickan area of a time bar, it changes to the extension mode One column of time line represents one hour [Extension Mode] Displays the time line of one hour before Displays the time line of one hour after If you double-clickan area of a time bar, it changes to the normal mode Each time line represents 5 minutes 7.Next button It operates the same as the Next button in the Monitoring mode 8.Reload button It renews the recording time information in both the calendar and time line 9.Local Mode :Click this button to change to the Local mode Smart Viewer _67 72 appendixPRODUCT SPECIFICATIONDetails Notes Operating System Embedded OS Broadcasting NTSC / PAL System Input Voltage AC 100 ~ 230V (PAL) AC 110 ~ 220V (NTSC) Power Usage Video Video Input Composite 16(8) Channel - 1.0Vp-p - 75Ω Hi Z Termination BNC Type Loop Through Out 16(8) Channel - Auto Termination Video Output Composite 3 Channel - Normal Video Output 1 Channel - Spot Output 2 Channel - BNC Type S-Video1 Channel VGA 1 Channel Audio Input Mono 4 Channel - -5dBm,600Ω RCA Type Audio Output Mono 1 Channel - -6dBm Live Screen Resolution & Frame Speed Display Mode Single Screen Split Mode : 4, 6, 7, 8, 9, 16 split Mode sequence Freeze 2 X Zoom 73 CompressionMethod Audio : ADPCM Specs Normal Record REC Key Mode Programmed Recording Schedule Table -AlarmDetection -MotionDetection -VideoLoss -Pre& Post Recording Recording ips NTSC : 0.9 / 1.8 / 3.7 / 7.5 / 15 / 30ips PAL : 0.7 / 1.5 / 3.1 / 6.2 / 12.5 / 25ips ps) Save Internal ATA HDD x 3(MAX) MAX HDD Size : 500GB x 3 = 1500GB External USB HDD -MAX1 (Not support USB hub) -MAXHDD Size : 500GB Play Back Search Mode Calendar search Event search - Alarm, Motion, Video Loss Date/time search Initial search Latest search Backup search Total ips(CIF) 60/50ips (Half D1) 74 Single 1Channel Decoding16 split (played cameras10-16) 9 split (played cameras 5-9) 4 split (played cameras 2-4) PIP 1 Channel Decoding + 1Channel Live Triplex 9 split 8 Channel Live + 1Channel PB Play Mode Play, Pause, Stop, 2x Digital Zoom Fast Forward/Fast Reverse Backup USB External HDD USB CD/DVD Writer, Internal DVD USB memory Network Ethernet : 10/100 Base T, ADSL(PPPoE), DHCP Serial RS-485 PTZ Device Control Communication Remote Control Device Input : 16 Channel Outout : 4 Channel Support external alarm reset Remote PC Detailed CPU : Pentium III, 1GHz or higher Viewer RAM : SDRAM 256MB or higher Graphic Accelerator : Graphic Memory 32MB or higher DirectX : 8.1 or higher Supported Win2000, WinXP Operating Systems Function Live Image Monitoring Mode Local File Search & Play Back Mode Remote File Search & Play Back Mode Operating Temperature 0ºC to 40ºC (32ºF to 104ºF) Storage Temperature -20ºCto 60ºC (-4ºFto 140ºF) Operating Humidity 20% to 85% RH Storage Humidity Size (W x H x D) 430 x 88 x 400mm (16.93 x 3.46 x 15.75 inch) Weight ~7.6kg (16.75 lb) 75 OUTLINE DRAWINGS77 FACTORY DEFAULTClassification Detailed Items Factory Setup System Time/Date/Language Date Format YYYY-MM-DD Time Format 24 Hours Language English DST Password Lock Record Lock HDD Mode HDD repeat record Overwrite HDD ending alarm Camera Config CAM_01 to CAM_16 (SHR-5082 :8) Auto Seq 5 sec PTZ Device Camera No Protocol Baudrate Parity Data Stop Serial Mode Half Duplex Screen Setup Brightness Contrast Color 78 MonitoringEvent Monitoring Date OSD Display Time Status Spot Out Channel CH1 Spot Out Event Monitor Monitor Out Dual Out Play channel location Lower right-handcorner Multi-channelchange 5 seconds Record Mode Record Quality & Auto Normal Quality Deletion Event Quality Auto Deletion Record Rate & Video Normal Rate 7.5ips(NTSC)/6.2ips(PAL) Size Event Rate Video Size CIF Event Record Duration PreEvent PostEvent 1 min Record Continuous Recording Schedule Event Record Sensor State Detection Setup Motion Detection Setup M.D State Area All Area Sensitivity Very High Video Loss Detection 79 appendix _7580 TROUBLESHOOTING (FAQ)PROBLEM SOLUTION The system power is dead and Please check the power connection LEDs on the front of the set do not Check the power voltage operate at all or exchange the power supply Video data remains in the system Check the image of the camera connected to the but some channels display no system. Improper input of camera may cause this video data but turns all blue symptom Check the camera power supply Sometimes, you see this symptom when the video data is connected with multisystems and the video signal from the video data distributor in use is weak If it’s the case, you shall connect the camera images with your DVR directly to check or correct the The RECORD button is pressed Please check the HDD space but the REC LED does not light and Please check the Record Mode setup in MENU recording is not active It should be On Although all the LED operate on the Please make sure the cable is connected. Video front panel, the screen is blink or out may come out differently with the connected the display quality is low monitor. In short, Video Out is set to Composite Output but connected to VGA Input Monitor or vice versa. Then, keep pressing both the MODE button and the ZOOM button for 5 seconds to change the Video Out mode You may experience low display quality while the dual video output is in use. In this case, please switch it to the composite or VGA video output The LEDs blink and the logo screen This symptom may be resulted from the failure repeatedly appears of HDD connection inside the DVR. Take off the cover and check HDD connection status. If HDD connection has no problem, please consult with the dealer You cannot enter MENU by forgotten password the values set at the factory. Keep pressing both the MODE button and the PTZ button for 5 seconds The default password is “4321.” The channel button does not If the current screen is in Event Monitoring, the operate in Live mode channel button does not operate Then, press the ALARM button to terminate the current screen and select a channel The cursor cannot reach the Please check both the channel and date are left starting point during Calendar checked. Both shall be checked for play with Start Search The cursor cannot reach the unrecorded date 81 Alarms keep continuously issued Press the MENU button and do the following: so you cannot cancel using the 1) To cancel Event Monitoring: Monitoring > Event ALARM buttonMonitoring Duration Off 2) To cancel Buzzer: Event Record > Alarm (Motion 2) To cancel Buzzer:Detection/Video Loss) > Alarm-Out 3) To cancel Event: Event Record > Alarm (Motion 3) To cancel Event:Detection/Video Loss) > State Off Pressing the PTZ button in Live Check the Protocol and other setup values through mode receives no responseMenu > Camera > PTZ Device match with the PTZ match with the PTZ camera When you connect several It requires time to recognize several armored HDDs IEEE1394 armored HDDs to the Please try again in a few minutes. If retrial makes no DVR through Menu, the DVR cannot improvement, HDD could be abnormal recognize all the HDDs Please exchange the HDD “CLOCK BATTERY HAS FAILED” is This message is displayed if the internal clock in displayed on the screen DVR has problem You cannot connect to the DVR through Smart Viewer your DVR. The DVR allows no more than 3 users’ connection with Smart Viewer at a time Check the Network setup of your DVR Check Network cable connection please check if you get the right DVR MAC Address If your DVR is connected to the ADSL network please check if the bandwidth is set below Kbps. If the Bandwidth for ADSL is set to high, the connection with Smart Viewer may be instable due to the heavy network load because the ADSL speed is low Smart Viewer in operation is If you change information such as time, network disconnected setup, HDD format, Default Setup, or HDD attachment or detachment for your DVR, the current Smart Viewer will be automatically disconnected Check the network connection. Smart Viewer, if disconnected from the network, will try reconnection up to 5 times. If it remains unconnected after 5 time trials, it will automatically give up connection As far as your DVR is connected to the ADSL network, you may be disconnected from Smart Viewer when the network conditions go worse 82 The Audio icon of Smart Viewer If your PC has no Audio driver or has some problem is left deactivated in Live mode with Audio play by an Audio driver, the Audio icon Setting Audio to On in the Camera will be deactivated. Please check Audio driver menu of your DVR will make no installation status difference When selecting the channel which PTZ control is available in both Smart Viewer and PTZ Camera is connected to in your DVR. Other user might control the PTZ for your the Live mode of Smart Viewer DVR to terminate the PTZ Camera Menu or Auto click the “Menu Control” button Pan/Scan/Pattern motions while you select the other among PTZ setup buttons to enter channel. This may cause the initialization the Function Menu mode in PTZ Camera, and return from the other channel, the PTZ related buttons have been initialized No Time Bar in the Search Time Line can be converted into 2 modes, General (24 Hour Display) and Extension (2 Hour Display). In Extension mode, Time Bar may not be seen in the current time. Please enter General mode or click the LEFT or RIGHT button to search Time Bar “NO HDD” icon and error message Please check the HDD connection status. If this pops up problem persist without connection failure, contact the technical support for checking hard disk DVR device does not show what has been upgraded after adding a is one of the devices listed on the compatibility list hard disk of HDDs. The list of the compatible devices with Samsung DVR can be obtained from your vendor The connection status is not shown after connecting the external one of the storage devices listed on the compatibility storage device, USB memory, USB list of storage devices. The list of the compatible HDD and such devices with Samsung DVR can be obtained from your vendor 83 OPEN SOURCE LICENSE REPORT ON THE PRODUCT
Also you can find more Samsung manuals or manuals for other Home Audio.