CONNECTING POS DEVICE

1.You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with a RS-232C cable.

2.Connection setup for the RS-232C port is available in “Menu > Device > POS Devices”, press the

<POS Device Setup> button and set <Baud rate, Parity, Data, Stop bit and Transfer Type>. (Page 45)

CONNECTING THE ALARM INPUT/OUTPUT

The Alarm In/Out port at the back is composed of the following.

1. Alarm In/Out Port on 7080/7082/8080/8082

2. Alarm In/Out Port on 7160/7162/8160/8162

•ALARM IN 1 ~ 8 (SHR-7080/7082/8080/8082) : Alarm Input Port

•ALARM IN 1 ~ 16 (SHR-7160/7162/8160/8162) : Alarm Input Port

•ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes sensing.

•ALARM OUT 1 ~ 4 : Alarm Output Port

DEVICE OTHER WITH CONNECTING

ALARM OUT

 

ALARM IN

 

ALARM IN

English _21