Things to know befor
Things to know before you connect the
e you connect the
Multi-Satellite Receiver to your TV set and
Multi-Satellite Receiver to your TV set and
other components
other components
Protect your components from power surges
Always turn off and unplug your Multi-Satellite Receiver, TV, and any
other components before connecting or disconnecting any of the cables.
Make sure to position all cables correctly to avoid audio hum or interference
• Make sure that all cables are plugged or screwed tightly into their jacks.
• After connecting the components, please run the audio/video cables along
the side of the TV set, rather than straight down the back of the TV.
• Please make sure that all antennas and cables are properly grounded.
Make sure to protect your components from overheating
• Do not block ventilation holes in the top of the Multi-Satellite Receiver,
or any other components. Make sure to position the components so that
air can circulate freely.
• Do not stack components.
• If you are positioning the components in a stand or rack, make sure to allow
for proper ventilation.
• If you have a stereo amplifier or receiver as a system component, please place it
on the top shelf or top rack so that hot air rising from it will not flow around
other components.
Setting Up and Connecting
9