Samsung SIR-S60W

Setting Up and Connecting

Plugging in the Receiver and T

Plugging in the Receiver and Tur

urning on the

ning on the

System

Setting Up the Satellite Dish Antenna

Make sure your TV and Multi-Satellite Receiver are turned on and connected to each

other properly.

Selecting your dish type

Determing the azimuth and elevation

To properly point your satellite dish antenna at the DIRECTV satellites, you need to

know your azimuth, elevation, and tilt (if applicable) coordinates. Azimuth is defined

as the angle between magnetic North and the location of the satellites, as measured

along the horizon. More simply, azimuth relates to the left-to-rightpositioning of

your dish. Elevation is the angular distance of the satellites above the horizon in

relation to your dish location. In other words, elevation is the up-and-down

positioning of your dish.

Plug the end of the power cord completely into a wall outlet.

Press the button on the remote control or the front of the

Multi-Satellite Receiver. The red light indicator labeled POWER on the

front panel will illuminate.

Press the button again to turn off the Multi-Satellite Receiver.

Access the Main Menu by pressing the button. Select the Setup menu,

and then select the Satellite Dish menu.

Highlight the Select Type item and press the button.

Press the button repeatedly to toggle through Round Dish, Oval Dish-2

Satellite Locations, and Oval dish-3 Satellite Locations. Pick the dish type you

are using with your receiver.

POWER

Select the Select Location item from the Satellite Dish menu.

Enter your 5-digit Zip code using the buttons. After entering all

5 digits, the proper azimuth, elevation and tilt (if applicable) values will display

for your area.