Getting started
•Do not cover the antenna area with your hands or other objects. This may cause connectivity problems or drain the battery.
•Using a
Maintaining water and dust resistance
The device may be damaged if water or dust enters the device. Follow these tips carefully to prevent damage to the device and to maintain the water- and
•Do not immerse the device in water deeper than 1 m and keep it submerged for more than 30 minutes.
•Ensure that the back and multipurpose jack covers are tightly closed. Otherwise, they may not provide protection from water and dust.
•Do not immerse the device in water for extended periods.
•Do not expose the device to water moving with force, such as water running from a tap, ocean waves, or waterfalls.
•Do not open the device’s covers when the device is in water or in very humid places, such as swimming pools or bathrooms.
•Do not open the back cover using wet hands or when the device is wet.
•The rubber seal fitted to the back cover is an important component of the device. Take care when opening and closing the back cover to avoid damaging the rubber seal. Also, ensure that the rubber seal is free from debris, such as sand or dust to prevent damage to the device.
•Do not detach or remove the multipurpose jack cover from the device.
•If the device is exposed to freshwater, dry it thoroughly with a clean, soft cloth. If the device is exposed to any liquid other than freshwater, rinse the device with freshwater immediately and dry it thoroughly with a clean, soft cloth. Failure to rinse the device in freshwater and dry it as instructed may cause the device to suffer from operability or cosmetic issues.
•The back and multipurpose jack covers may be loosened if the device is dropped or receives an impact. Ensure that all the covers are properly aligned and tightly closed.
9