Settings

Activate power-saving mode and change the settings for power-saving mode.

•Power saving mode: Activate power-saving mode and change the settings for power- saving mode.

•Ultra power saving mode: Extend standby time and reduce battery consumption by displaying a simpler layout and allowing limited access to an application.

The estimated maximum standby time shows the time remaining before the battery power runs out if the device is not used. Standby time may vary depending on your device settings and operating conditions.

Storage

View memory information for your device and memory card, or format a memory card.

Formatting a memory card permanently deletes all data from it.

The actual available capacity of the internal memory is less than the specified capacity because the operating system and default applications occupy part of the memory. The available capacity may change when you upgrade the device.

Security

Change settings for securing the device.

•Device administrators: View device administrators installed on the device. You can allow device administrators to apply new policies to the device.

•Unknown sources: Set the device to allow the installation of applications from unknown sources.

•Encrypt device: Set a password to encrypt data saved on the device. You must enter the password each time you turn on the device.

Charge the battery before enabling this setting because it may take more than an hour to encrypt your data.

99