Installing the Camera using the Mount-Corner
1.Choose an installation site that can suffi ciently support 5 times the weight of the equipments to be installed.
2.Place the mount-corner to the corner to which you want to install the camera and mark screw holes with a pencil (indicated by the blue circles in the illustration). Drill a pilot hole for each pencil mark (5mm in diameter and at least 35mm in depth), and then fully insert the supplied plastic anchors (HUD 5) into them.
3.Install the mount-corner by aligning the four holes of the mount-corner to the holes of the plastic anchors, and then fastening the screw-tappings (BH M3 X 30).
SCREWTAPPING (BH M3 x 30)
SCREWTAPPING (BH M3 x 30)
English-24
