Samsung SMX-C14GN, SMX-C14RN Connecting a Power Source, Inserting the battery pack, 16English

preparation

CONNECTING A POWER SOURCE

•Be sure to charge the battery pack before you start using your camcorder.

•Use the IA-BH130LBbattery pack only.

•The battery pack may be charged a little at the time of purchase.

Battery pack insertion/ejection

It is recommended you purchase one or more additional battery packs to allow continuous use of your camcorder.

Inserting the battery pack

1.Slide and open the battery slot cover as shown in the figure.

2.Insert the battery pack into the battery slot until it locks.

•Make sure that the SAMSUNG logo is facing left while the battery pack is placed as shown in the figure.

3.Slide and close the battery slot cover.

Ejecting the battery pack

1.Slide and open the battery slot cover and push the Battery pack release switch.

•Gently push the Battery pack release switch in the direction as shown in the figure to eject the battery.

2.Pull the ejected battery out in the direction as shown in the figure.

3.Slide and close the battery slot cover.

•Remove the battery pack separately from the camcorder while not in use.

•It is recommended to prepare an additional battery pack for prolonged outdoor use.

•Additional battery packs can be purchased from samsungparts.com.

Insert

Eject

[Battery pack release] Switch

16_English