Samsung SMX-C10FP, SMX-C14RP, SMX-C14GP, SMX-C14LP, SMX-C13LP Zooming in and OUT, 48English

recording

ZOOMING IN AND OUT

Use the zoom function for close-up or wide-angle recording. This camcorder allows you to record using optical 10x power zoom and 1200x digital zoom.

•You can zoom with the zoom lever or the Control (W/T) button on the LCD panel.

•Zoom magnification over 10x is done through digital image processing,

and is therefore called digital zoom. Digital zooming is possible up to 1200x. Set "Digital Zoom" to "On." ²page 67

To zoom in

•Slide the Zoom lever towards T (telephoto).

(Or press the Control button (T) on the LCD panel.)

To zoom out

•Slide the Zoom lever towards W (wide-angle).

(Or press the Control button (S) on the LCD panel.)

~

{

OK

W:Recording wide area (wide-angle)

T:Recording enlarged image (telephoto)

•The minimum possible distance between camcorder and subject while maintaining sharp focus is about 5cm (about 1.96 inch) for wide-angle and 1m (about 39.4 inch) for telephoto.

•The focus changes when zooming after focussing manually.

Focus automatically or seize the desired scene by zooming before focussing manually. ²page 62

•Optical zoom preserves image quality, but during digital zoom the image quality may suffer.

•Fast zooming or zooming in subject from afar may produce slow focussing. In this case, use "Manual Focus." ²page 62

•It is recommended to use "Anti-Shake (HDIS)" with handheld recording if the subject is zoomed in and enlarged.

•Frequent use of the zoom function consumes more power.

•The zooming speed of the zoom lever and zoom button are different.

Use appropriately at your preference. For faster zooming adjustment, use the zoom lever. For slower zooming adjustment, use the zoom buttons.

W: Wide angle T: Telephoto

STBY 0:00:00 [245Min]

48_English