Charging the built-in rechargeable battery
The built-in battery is always recharged while your camcorder is connected to the AC power or while the
battery pack is attached.
If the camcorder is not in use for about 2 months without connecting to the AC power or attaching the
battery pack, the built-in battery fully discharges. If this occurs, charge the built-in battery by connecting
to the supplied AC adaptor for 24 hours.
After setting, the date and time are automatically recorded on a special data area of the storage media.

Turning the date and time display on/off

To switch the date and time display on or off, access the menu and change the Date/Time mode. ²page 91

Simple setting of the clock by time difference

You can easily set the clock to the local time by setting a time difference when using your camcorder abroad.
Select "Time Zone" on the menu, then set the time difference. ²page 88
36_English
preparation