Samsung SMX-C14GP, SMX-C14RP, SMX-C14LP Date/Time Display, LCD Brightness, LCD Colour, English91

Date/Time Display

You can set the date and time to display on the LCD screen.

•Before you use the “Date/Time Display” function, you must set the date and time. ¬page 35

Settings	Contents	On-screen display
Off	Current date and time information is not displayed.	None
Date	Displays the current date.	01/JAN/2009
Time	Displays the current time.	00:00
Date & Time	Displays the current date and time.	01/JAN/2009 00:00

•The date/time will read “01/JAN/2009 00:00” in the following conditions: - The built-in rechargeable battery becomes weak or dead.

•This function depends on the “Date Type” and “Time Type” setting.

LCD Brightness

•You can adjust the brightness of the LCD screen to compensate for ambient lighting conditions.

•Pressing the Control button ( X) will brighten the screen whereas pressing the Control button (W ) will darken the screen.

•A brighter LCD screen setting consumes more battery power.

•If you adjust the LCD brightness when the ambient lighting is too bright, it is hard to see the monitor indoors.

•LCD Brightness does not affect the brightness of images to be stored.

•You can adjust the LCD Brightness from -15 to 15.

STBY 0:00:00 [245Min]

LCD Brightness

0

Exit Adjust Ok

LCD Colour

•You can change the colour impression of the screen with a variety of colour options by adjusting the colour rate of red and blue.

•When you set red and blue colour range, the higher the figures the brighter the LCD screen will be.

•You can adjust the LCD colour (red/blue) from -15 to 15, using the Control button (S / T / W / X / OK).

STBY 0:00:00 [245Min]

LCD Colour

Red 0

Blue 0

• You can manipulate the colour displayed on the LCD screen by adjusting the colour ratio	Exit	Move	Ok
of red and blue.

•Adjusting the colour display of LCD screen does not affect the image to be recorded.

•Higher the value will produce brighter LCD screen when adjusting colour range of red and blue.

English_91